Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Francisco, CA | Mason Remodeling
We’re Mason Remodeling, offering Mr Glass sales & service as an independent provider working across San Francisco, CA since 2004. We install, repair, and replace Mr-Glass patio doors, windows, shower enclosures, and glass cladding without being tied to the manufacturer. That independence means we can pair Mr-Glass components with the right substrate, waterproofing, and flashing for each San Francisco building’s quirks. Call (803) 680-2547 for a free estimate, and we’ll tell you exactly what your project needs.
Why San Francisco Residents Choose Us for Mr-Glass Service
We’ve worked on Mr-Glass installations in more San Francisco homes than we can count, from Victorian flats in the Mission to high-rise condos near the Embarcadero. Isaac Pruett, our owner, grew up in the San Fernando Valley watching the neighborhood fix what the last contractor got wrong. He enrolled in Los Angeles Trade-Technical College and has spent two decades remodeling homes across California. His dad was a finish carpenter, so when trim work is sloppy, Isaac notices. On every Mr-Glass job, he checks the same details: level, plumb, seal, and hardware function.
We’re not manufacturer-affiliated, which is exactly why San Francisco homeowners call us. When a Mr-Glass 5000 Series patio door roller seizes from fog corrosion, we don’t push a full replacement just because that’s what the factory suggests. We source OEM Mr-Glass replacement parts when they preserve fit and finish, and we use high-grade stainless or nylon aftermarket equivalents when the original part is a known weak point. We tell you which is which and why, in plain language, before any work starts.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Francisco
These are the issues we see most often in San Francisco, and each one has a local cause:
- 5000 Series sliding door roller seizure: The aluminum rollers on Mr-Glass 5000 Series patio doors corrode and seize in San Francisco’s salt-laden fog. Homes within a mile of the Pacific, especially in the Sunset and Richmond districts, see this constantly. The door gets hard to slide, then won’t move at all.
- 1500 Series window seal failure: Vinyl seals on Mr-Glass 1500 Series aluminum windows turn brittle and crack from San Francisco’s daily thermal cycling. Foggy 50°F mornings followed by sunny 70°F afternoons stress the material until it splits. You’ll feel drafts, and water finds its way in.
- Frameless shower enclosure hinge loosening: San Francisco’s older pier-and-beam floors flex under weight. Mr-Glass 8000 Series frameless shower enclosures mounted on these floors develop loose hinges and chipped glass at the pivot points. The glass is fine; the mounting is the problem.
- Hardware finish failure from fog plus kitchen moisture: Mr-Glass window and door hardware loses its finish early when Bay Area fog combines with steam from unvented kitchens and baths. Older San Francisco homes often lack mechanical ventilation, so the hardware takes a beating.
- Historic window profile mismatches: When Mr-Glass windows need replacement in Presidio Heights or Pacific Heights, standard stock units rarely match the original Victorian or Edwardian sightlines. Custom fabrication is often the only route that satisfies San Francisco’s residential design guidelines.
Mr-Glass Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s Residential Design Guidelines and historic preservation requirements change how Mr-Glass repairs get done here. Street-facing windows and doors in neighborhoods like Presidio Heights and Pacific Heights must often retain their original profiles and finishes. That means a Mr-Glass replacement isn’t a swap-for-stock job. It’s a custom fabrication project that matches Victorian or Edwardian sightlines while meeting current code. A homeowner who orders a standard Mr-Glass 1500 Series window for a Queen Anne on Washington Street will likely fail the planning review. We handle the fabricator coordination, the permit paperwork, and the install, so the window fits both the opening and the design review. That’s a problem San Francisco owners face that doesn’t exist in most of California, and it’s one we know how to solve.
Mr-Glass Models & Products We Service in San Francisco
Our crews work on the full Mr-Glass product range you’ll find in San Francisco homes. We service the Mr-Glass 5000 and 6000 Series sliding patio doors, the 1500 Series aluminum windows, the 8000 Series frameless shower enclosures, and custom mirror and glass wall cladding. We keep common OEM Mr-Glass rollers, hinges, seals, and gaskets in our local stock so most San Francisco repairs can happen quickly. When OEM parts aren’t available or the original design was weak, we switch to stainless or nylon equivalents and explain the tradeoff. Our repair-first stance applies across the board: we recommend full unit replacement only when the frame or glass is compromised. Otherwise, targeted hardware and seal repair often extends the equipment’s life for a fraction of replacement cost.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Francisco
Here’s what Mr-Glass work costs in San Francisco, using the ranges we quote most often:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
The final number depends on the condition of your existing framing, the waterproofing required, and whether we need custom fabrication to match historic profiles. A written price is delivered before any work begins, every time. No verbal estimates that grow on the final bill. Call (803) 680-2547 to schedule your free estimate.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Francisco
Yes, in most cases we can replace just the glass panel in a Mr-Glass 5000 Series sliding door. The decision comes down to whether the aluminum frame is still solid and square. If the frame is intact, we order the correct tempered or laminated glazing unit and install it with new glazing gaskets. If the frame has corrosion, water damage, or the track is warped, a full door replacement usually makes more sense. Call (803) 680-2547 and we’ll tell you which path fits your door.
The corrosion isn’t from dirt, it’s from salt in San Francisco’s fog combined with interior moisture. Fog carries salt from the Pacific, and it settles into the hardware’s small crevices. When your kitchen or bath adds steam without proper ventilation, the salt reacts with the metal and the finish breaks down. We replace the corroded hardware with marine-grade stainless equivalents and recommend addressing the ventilation issue so the new parts last.
A permit is typically not required for a direct shower enclosure replacement in San Francisco when you’re swapping like-for-like without moving plumbing or structural walls. A permit becomes necessary if we’re moving drain lines, changing the shower footprint, or altering load-bearing walls during Bathroom Remodeling - San Francisco projects like a tub-to-shower conversion. We pull permits when they’re needed and handle the inspections, so you don’t have to figure out the San Francisco Department of Building Inspection process yourself.
San Francisco’s older homes often sit on pier-and-beam foundations that flex slightly when you walk across the room. That movement transfers to the shower wall and the mounted glass. Mr-Glass 8000 Series enclosures installed without accounting for this flex will develop loose hinges and chipped glass over time. We reinforce the mounting points, use flexible setting blocks, and sometimes add structural backing behind the tile before the glass goes in. It’s a detail that prevents cracked glass a year later.
Yes, and this is one of the most common requests we get from owners in Presidio Heights, Pacific Heights, and the Haight. San Francisco’s historic preservation rules require street-facing windows to keep their original sightlines. We work with local fabricators to produce Mr-Glass-compatible frames that match the period profile while meeting today’s glazing and energy standards. Call (803) 680-2547 for an exact quote on your project; estimates are free.
Service Areas Near San Francisco
We serve San Francisco and the surrounding Bay Area, including San Francisco service area coverage from the Richmond to the Bayview. Our crews also work in nearby markets like Mr-Glass service in Fresno and Mr-Glass service in Sacramento, along with San Jose and Oakland.
Book Your Mr-Glass Service in San Francisco Today
We’re ready to walk your project as our General Contractor in San Francisco, answer your questions, and give you a written price before any work starts. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise. Call (803) 680-2547 for your free estimate.
Written by Isaac Pruett, Owner at Mason Remodeling, serving San Francisco since 2004.
