Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Mr-Glass Construction
Mason Remodeling is an independent general contractor that provides Mr Glass repair in Los Angeles, and we handle everything from frameless shower enclosure replacement to full bathroom rebuilds with Mr-Glass glass assemblies. We are not authorized by or affiliated with Mr-Glass, but that independence actually works in your favor: we source OEM-spec parts when they make sense and better aftermarket components when they don’t, and we never have to ask a manufacturer for permission to tell you the truth about your glass. If you have a Mr-Glass shower enclosure, mirror system, or kitchen glass installation in Los Angeles that needs service, call (803) 680-2547 and we’ll give you a written price before any work starts.
Here’s what makes this page worth your time: real failure modes on real Mr-Glass product lines, honest repair-vs-replace guidance, Los Angeles-specific water and seismic considerations, and what it actually costs. No generic filler.
Why Trust Mason Remodeling for Your Mr-Glass Construction?
Our founder, Isaac Pruett, grew up in the Sylmar end of the San Fernando Valley, where he learned early that half the neighborhood spent weekends fixing what the last guy did wrong. His dad was a finish carpenter, and Isaac still checks trim work before he considers any job done. After high school he went through the construction technology program at Los Angeles Trade-Technical College, studying framing, finish work, and plan reading. That’s the foundation we build on every time we touch a Mr-Glass enclosure or install new glass in a Los Angeles home.
We’ve handled hundreds of Mr-Glass branded installations across the city: frameless shower enclosures, mirror systems, glass shelving, kitchen backsplash glass. We know which roller assemblies bind first, which gasket profiles fail in direct sun, and where water intrusion hides when a seal lets go. More importantly, we know the local code requirements for glass in wet areas and the attachment standards inspectors in Los Angeles want to see. When we work on a Mr-Glass product, we treat it the way a manufacturer-trained tech would, plus the field experience that comes from seeing what actually fails after ten years of hard water and sun exposure.
Every crew member who arrives at your door is background-checked and identity-verified under the Threshold Standard, a named process we follow on every job. You get the technician’s name and photo before the visit, and they show a photo ID badge when they arrive. Know who’s coming, know what it costs, know it’s backed up, everything else is just noise.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Los Angeles
- Shower door rollers binding or jumping off track. The Mr-Glass sliding bypass and semi-frameless shower doors use roller assemblies in a bottom track. Los Angeles hard water leaves mineral deposits that wear the roller bearings and score the track surface. Eventually the door binds, then lifts off the track when someone tries to force it closed. We replace the roller assemblies with OEM-spec parts and, when necessary, swap out a scored track so the door glides the way it did new.
- Frameless glass panel gaskets and seals leaking. The Mr-Glass Serenity series and custom 3/8 inch to 1/2 inch glass panels rely on vinyl sweeps and gaskets where the glass meets the curb and wall channels. After years of thermal cycling in bathrooms that get afternoon sun, those seals shrink and split. Water seeps through, sits on the curb, and eventually rots the wood framing or delaminates the tile. You see a wet spot outside the shower and it’s not from overspray. That’s a seal problem. We pull the panel, inspect the substrate, and replace the sweeps before hidden damage spreads.
- Edge chips and scratches on tempered glass near hinges. Tempered glass is strong across its face but vulnerable at the edges. A chipped edge near a hinge on a Mr-Glass enclosure concentrates stress. Over time, sometimes months, that chip can turn into a spontaneous shatter. We see this on original 1990s and 2000s installations around Los Angeles, especially in homes that have settled. If we find edge damage we tell you straight: this panel is a safety item, not a cosmetic fix.
- Mirror delamination from moisture. Wall-mounted Mr-Glass vanity mirrors can pull away from the wall when the original adhesive was applied thin or the wall behind is drywall that took on moisture. The mirror sags, the adhesive sheets peel, and you’re left holding the top edge while you wonder if the whole thing is coming down. We remove, inspect the wall surface, and remount with proper glass adhesive and mechanical support where the framing allows it.
- Cabinet glass insert rattling or loose. Mr-Glass cabinet inserts sit in routered grooves or are held with rubber splines. When the splines age out or the door swells from humidity, the glass rattles when you open and close the cabinet. Tightening doesn’t fix it. The right fix is removing the panel, cleaning out the groove, and resetting the glass with fresh spline material. We do this in kitchen remodels all over Los Angeles, usually while we’re in there replacing cabinet hardware and dealing with the usual kitchen wear.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source OEM-spec Mr-Glass replacement rollers, seals, hinge assemblies, and hardware whenever those parts are still available. Sometimes they are, sometimes the model was discontinued years ago and the manufacturer has moved on. When OEM isn’t available or the spec doesn’t cover what we’re seeing in the field, we use high-quality aftermarket glass and metal components that meet or exceed the original thickness and safety ratings. We don’t put thinner glass back into an enclosure that was engineered for half-inch tempered panels, and we don’t swap stainless hardware for chrome-plated steel that will corrode in a Los Angeles bathroom within two years.
When a Mr-Glass enclosure has multiple failed seals, corroded hinges, and a delaminating mirror all at once, we recommend replacement over repair. Glass that’s older than ten years, especially original glass in a home that’s settled through a few earthquake seasons, isn’t worth patching. We’ll walk you through the numbers: what the repair would cost, what a new enclosure would cost, and how long each option actually lasts. The decision is yours. We just make sure you have the real picture before you decide.
Our Mr-Glass Service Process – Step by Step
Here’s how Mr-Glass service works with us, from first call to finished job:
- 1
Specific diagnosis. You describe what’s happening: door dragging, water on the floor, a mirror pulling away, rattling glass. We ask the questions that actually narrow it down. Then we schedule a visit with a technician whose name and photo you’ll receive before we arrive.
- 2
On-site evaluation. We inspect the Mr-Glass product in place, check the rollers, seals, hinges, glass condition, attachment points, and the surrounding tile and waterproofing. We look for the hidden stuff: moisture behind the curb, framing rot, glass edge damage you haven’t noticed yet. We measure, document, and give you a written line-item quote. No verbal number that grows later.
- 3
Repair or installation. For a roller swap, we’re done within a few hours. For a full Mr-Glass enclosure replacement, we remove the old glass, inspect and repair the substrate, waterproof properly, and set the new panels. We install to manufacturer specs and to local building code. That means proper silicone, proper clearances, and proper attachment in studs, not drywall anchors.
- 4
Testing and cleanup. After we install, we run the door through its full range, check for leaks around every seal, and inspect the glass for edge defects. Then we clean the glass, haul off the old material, and leave the bathroom usable.
- 5
Warranty on our work. Every job gets a written guarantee with clearly stated terms: what’s covered, what’s excluded, and for how long. If a repair or installation fails within 365 days from the completion date, we return and make it right at no cost to you. That’s the 365-Day Done Right Promise, and it applies to every general contracting job we do.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Los Angeles
We work on the full Mr-Glass residential glass line: frameless shower enclosures including the Serenity series and custom 3/8 inch and 1/2 inch panels, semi-frameless and sliding bypass shower doors, mirror and glass shower door systems, custom glass shelving, vanity mirror systems, kitchen backsplash glass, and cabinet glass inserts. We keep common roller assemblies, seal profiles, and hardware on hand for faster turnaround, including Mr Glass service in Glendale and throughout the Los Angeles area, and we order custom glass cut to spec for panel replacements.
We Also Service These Brands
While this page focuses on Mr-Glass, our crews work across the major kitchen and bath brands every week. We install and service cabinetry from KraftMaid, quartz surfaces from Cambria and Silestone, and fixtures from Kohler, among others. If your Los Angeles home has a mix of brands, we can handle the whole scope without juggling multiple contractors.
FAQs – Mr-Glass Construction Service in Los Angeles
A dropped frameless door is usually a hinge problem. The hinge plates are pulling from the wall or the hinge pins have worn. On Mr-Glass enclosures, we inspect the attachment points first, because loose hinges on tempered glass get dangerous fast. Sometimes the fix is tightening and re-shimming the hinges. Other times the wall anchors have failed and the door needs to come down so we can reset everything properly. Call (803) 680-2547 and we’ll send a technician whose name and photo you’ll have before they arrive. Written quote before any work starts.
We use OEM-spec Mr-Glass parts whenever they’re available and genuinely the right part for the job. When OEM parts are discontinued or the original design has a known weakness, we use high-quality aftermarket components that meet or exceed the original thickness and safety ratings. We’ll show you exactly what we’re installing and why. Call (803) 680-2547 for a straight answer on your specific enclosure.
Los Angeles water runs hard. The minerals in it build up on glass, track, and rollers. On Mr-Glass sliding and semi-frameless doors, that buildup loads the bearings and scores the track, which is why doors start binding after a few years. It also etches the glass surface if you let it sit too long. Regular cleaning with the right products helps, but eventually the track and rollers need service. We stock replacements for common Mr-Glass roller assemblies so we can usually handle this in one visit.
Yes, and we do it regularly on kitchen remodels throughout Los Angeles, including Mr Glass service in Long Beach. Glass backsplash needs a level, properly prepared wall, and cabinet glass inserts need clean routered grooves and the right spline material. We’ll measure, cut to spec, and install these alongside the rest of your kitchen work. We’ll include the exact cost in your written estimate before we start, not as a change order later.
Stop using the shelf and don’t bump the mirror, then call us. A delaminating mirror can fall, and a loose shelf can drop glass on someone. We’ll remove the mirror or shelf safely, inspect the wall condition and framing behind it, and remount with proper adhesive and mechanical support. If the glass itself is damaged, we’ll quote a replacement. Call (803) 680-2547 and we’ll get someone out to look at it. Estimates are free.
Here are the current price ranges we’re seeing for Mr-Glass related work in the Los Angeles market:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation (Mr-Glass enclosure) | $5,310 – $14,160 |
| Full Bathroom Remodeling (including Mr-Glass glass & fixtures) | $10,620 – $33,040 |
| Tub-to-Shower Conversion (with Mr-Glass enclosure) | $4,130 – $11,800 |
| Shower Replacement (Mr-Glass glass and hardware) | $3,540 – $10,030 |
| Bathroom Vanity Installation (with Mr-Glass mirror) | $945 – $3,540 |
A recent Anaheim Mr Glass service job took us to a 1990s home in Sherman Oaks, where a Mr-Glass Serenity frameless shower enclosure had a chipped edge on the original 3/8 inch glass and a bottom seal that was completely shot from years of hard water and shifting foundation. We installed a new custom 1/2 inch clear tempered Mr-Glass panel set with upgraded stainless rollers and a new threshold. While we were in there, we found hidden moisture damage behind the curb, re-tiled the shower curb, and waterproofed behind it. The homeowner ended up with a safe, leak-free enclosure that matched the bathroom’s existing fixtures. That’s the kind of thing you only catch when you actually open the wall, and it’s why a written quote with real inspection matters.
Call (803) 680-2547 for your exact number. Estimates are free, and the written price covers the actual scope we find during inspection.
Book Your Mr-Glass Service in Los Angeles, CA
If you have a Mr-Glass shower enclosure, mirror system, or kitchen glass installation in Los Angeles that needs attention, call our office at (803) 680-2547. A live person answers, day or night. We’ll talk through what’s happening, schedule a visit with a verified technician whose name and photo you’ll receive in advance, and put your price in writing before any work begins. Los Angeles homeowners deserve that much before they open the door.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Los Angeles since 2004.
