Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Oakland, CA | Mason Remodeling
We install and service Mr-Glass shower enclosures and mirrors throughout Oakland, from Fruitvale to Montclair to the Dimond District. Our work here often comes down to one thing: Oakland’s old houses are rarely square, and Mr-Glass frameless enclosures demand measured glass cut to the wall’s actual angles, not stock kits. That’s the difference between an enclosure that seals leak-free for years and one that binds at the corner by spring. Call (803) 680-2547 for a free estimate, and you’ll get a written price before any work begins.
We’re Mason Remodeling, an independent Mr-Glass service provider, and we’re not authorized, sponsored, or endorsed by the manufacturer. That independence matters: we learned Mr-Glass hinge tolerances, glass thicknesses, and roller assemblies from hundreds of Oakland installs, not from a certification program. Our team handles everything from Serenity Series sliding doors to Visions Series pivots to custom-cut mirrors. If your Mr-Glass enclosure is leaking, dragging, or out of square, Mr-Glass sales & service work is what we do every week. And for the broader picture of where we work, start with our Oakland service area page.
Why Oakland Residents Choose Us for Mr-Glass Service
Most Oakland homeowners call us because their shower glass has stopped behaving: a sliding door that drags, a pivot hinge that’s sagging, a bottom seal that lets water onto the tile every morning. We know these failures because we’ve pulled apart Mr-Glass hardware on Victorians, Craftsman bungalows, and mid-century boxes all over the city. Isaac Pruett, our owner, came up through the construction technology program at Los Angeles Trade-Technical College and spent two decades remodeling homes before focusing on shower enclosures, and he still checks every piece of trim and hardware himself before a job is done. If you deal with us, you’ll get his name and photo before the visit, and our technician will show a photo ID badge at your door. That’s the Threshold Standard, and it’s not optional.
We’re a Mason Remodeling company, founded in 2004 as part of the Threshold Group family of home-service companies. We’re not a glass manufacturer, and we’re not pretending. What we are is the company Oakland calls when their Mr-Glass enclosure was installed slightly off by someone in a hurry, or when a ten-year-old roller set finally gives up. We order OEM Mr-Glass-compatible rollers, hinges, and seals when the original hardware is still available, and we upgrade to heavier stainless or brass when the stock part is what failed in the first place.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Oakland
These are the failures we see most on Mr-Glass equipment in Oakland homes, and they’re usually tied to the age and movement of the building itself.
- Binding bottom rollers on Serenity sliding doors. The guide-wheel assemblies on Mr-Glass Serenity Series sliders wear down and start binding on older, out-of-plumb shower curbs. In Oakland’s pre-1960 homes, where pier-and-beam foundations settle unevenly, a tile curb that looked level at installation can be a quarter inch low at one end five years later. The rollers chew themselves up, and the door sticks mid-track.
- Frameless panels going out of square. Wall movement and pier-and-beam settling in older Oakland houses rack frameless enclosures out of square. The door edge starts crashing into the fixed panel at the hinge corner, or a gap opens at the strike edge and lets water through every shower.
- Yellowed, cracked PVC seals and bottom sweeps. Original clear PVC seals and sweeps on Mr-Glass enclosures yellow, crack, and leak onto tile, especially after Oakland’s wet winters. The repeated humidity cycle plus hard Bay Area water shortens their life faster than in drier parts of the state.
- Pitted, loose hinges and handles. Builder-grade hinges and handles on older Mr-Glass installations pit and discolor from bathroom humidity and mineral-heavy water, then loosen and strip their mounting holes. Once the threaded insert in the glass hole strips out, tightening the screw tighter only makes it worse.
- Rusted bottom tracks on sliding enclosures. Standing water on an uneven curb eventually rusts through the thin metal track on older Mr-Glass Serenity sliders. The guide wheels drag on the rusted surface, the door gets harder to move, and the track eventually splits at the screw holes.
Mr-Glass Service in Oakland: What Local Conditions Mean for Your Equipment
Oakland’s housing stock is unusually old and mixed: Victorian and Craftsman homes on pier-and-beam foundations sit next to mid-century slabs and newer condos. What that means for Mr-Glass owners is that shower and bathroom walls are rarely plumb or square. We routinely measure openings that are three-eighths or a half inch out of square over a five-foot wall, and that’s normal here. A stock Mr-Glass frameless kit, cut to true 90-degree corners, will leave one side mounted flush and the other side gapped, or the glass will bind against the threshold because the curb has settled since 1936. The fix is measured, out-of-square custom glass: every panel cut to the actual angles of that specific bathroom, so the hardware sits evenly and the seals do their job. That is not a small detail; it’s the difference between an enclosure that works for fifteen years and one that leaks by the first rainy season. In Oakland’s Eastlake and Adams Point neighborhoods especially, you can have two identical floorplans where one wall is dead square and the other one isn’t, because the foundations settled differently in 1908.
In a 1920s bungalow off Fruitvale Avenue, we replaced a leaking Mr-Glass Serenity Series sliding enclosure where the bottom track had rusted through and the guide wheels were dragging on a bowed tile curb. We reset the curb, installed a new Mr-Glass-compatible bottom track and stainless rollers, and finished with a frameless fixed panel cut to the wall’s actual 3/8-inch out-of-square, sealing it leak-free. That’s the kind of job that separates a real Oakland shower glass company from a parts-swapper.
Mr-Glass Models & Products We Service in Oakland
We install, repair, and replace across the core Mr-Glass lines. Mr-Glass Serenity Series frameless sliding shower doors, Mr-Glass Visions Series pivot shower enclosures, Mr-Glass Elegance Series fixed glass panels and tub screens, and Mr-Glass custom-cut mirrors and glass shelving. When we repair, we source OEM Mr-Glass-compatible rollers, hinges, seals, and handles if the original hardware is still in production. When the stock part is the weak link, we step up to heavier stainless or brass rather than installing the same failure-prone piece again. And when the frame is bent or the glass is tempered-failed, we say so and replace it. Glass is not a repair item. For Oakland turnaround, we keep common Mr-Glass-compatible roller assemblies, seals, and hinge sets on the truck, which means most slider repairs finish the same day.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Oakland
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Vanity Installation | $800 – $3000 |
| Bathroom Remodel | $9000 – $28000 |
An out-of-square custom glass panel will push the price toward the upper end of the Walk-In range; a straightforward Serenity roller replacement with OEM-compatible parts lands near the low end of Shower Replacement or below. A written line-item price comes with every estimate, before work starts, and the number on that page is the number you’ll pay. Call (803) 680-2547 to schedule your free estimate.
Serving Oakland, CA - Our Local Coverage Area
We’re an Oakland General Contractor and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Oakland
Can you replace just the rollers on my Mr-Glass sliding shower door instead of the whole enclosure?
Yes, in most cases we can replace just the bottom roller and guide-wheel assemblies on a Serenity series sliding door, and that job typically ranges from $250 to $650 depending on hardware and how far out of level the curb has gone. If the bottom track itself is rusted or bent, we’ll tell you before touching anything, because new rollers on a bad track won’t last. Call (803) 680-2547 for an exact quote; estimates are free.
Will a stock-size Mr-Glass frameless enclosure fit my older Oakland bathroom?
Probably not, and we’re direct about that on the first visit. Oakland’s pre-1960 homes on pier-and-beam foundations have walls that are almost never plumb or square, and a stock Mr-Glass kit cut to true 90-degree corners will leave gaps you can’t hide with silicone. We measure every opening and order glass cut to the actual angles of your walls and curb, which costs a little more and works for years.
My Mr-Glass enclosure leaks at the bottom after heavy rain – is that a glass problem or a plumbing problem?
It’s usually a seal problem, not a plumbing problem. Rain itself doesn’t enter your shower; what happens in Oakland’s wet winters is that humidity stays high for weeks, and the old PVC bottom sweep and side seals stay continuously wet. They crack, yellow, and lose their compression, and then shower water finds the gap. We’ll check the seal condition first, then the curb slope, then look under the house at the drain line if those both look fine.
Do you service Mr-Glass mirrors and glass shelving as well as showers?
Yes. We cut and install custom Mr-Glass mirrors to size, including beveled edges and polished corners, and we mount Mr-Glass glass shelving with proper wall anchors rather than the plastic clips that eventually sag. If your mirror was cut in another era of the house’s life and the wall has moved since, we can recut or reposition it so it sits flush again.
How do you handle an out-of-square shower opening without making the glass look crooked?
We cheat the trim, not the glass. The glass itself is cut square and plumb; what we do is measure the actual wall angles and adjust the hinge offsets, the fixed-panel placement, and the threshold installation so the eye sees a clean rectangle. The gap lives behind the trim or inside the channel where it’s hidden and sealed. It takes measured, custom-cut panels and a dry-fit before drilling, which is standard practice for us on every Oakland enclosure. Call (803) 680-2547 and we’ll walk you through it with your specific bathroom dimensions.
Service Areas Near Oakland
From Oakland we serve homeowners across the East Bay and beyond: Alameda, Berkeley, San Leandro, Hayward, and Walnut Creek. We also run Mr-Glass service teams in other California markets, including Mr-Glass service in Anaheim and Mr-Glass service in Riverside.
Book Your Mr-Glass Service in Oakland Today
Call (803) 680-2547 to schedule your free estimate. We’ll put the price in writing before any work starts, introduce the technician by name and photo before arrival, and guarantee the work for a full year. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Oakland since 2004.
