Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fresno, CA | Mason Remodeling
We’re Mason Remodeling, a Fresno General Contractor and independent Ameristar service provider in Fresno, CA, and we repair, reface, and install Ameristar cabinetry across the city. The one thing that makes our Ameristar work here different is that we build for Fresno’s slab-on-grade homes and dry Valley heat, shimming and scribing cabinets so doors close square on floors that have settled over decades. We’re not a factory crew, and we’re not an authorized dealer. We’re local tradespeople who know these cabinet lines and this city’s houses. Call (803) 680-2547 for a free estimate.
Why Fresno Residents Choose Us for Ameristar Service
Ameristar cabinets show up in a lot of Fresno homes, from older bungalows near Tower District to newer tracts north of Herndon. We’ve installed and serviced Ameristar sales & service work here for years, so we know how its cabinet lines fit the Valley’s tight galley kitchens and slab-on-grade houses. Isaac Pruett, our owner, grew up around finish carpentry and learned framing and cabinet work through the construction technology program at Los Angeles Trade-Technical College before spending two decades remodeling homes. He checks trim and door alignment on every job before he considers it done, because sloppy work is the first thing a homeowner notices and the last thing we want our name on.
Our cabinet installers and finish carpenters are independent tradespeople, not factory representatives. That means we can be honest about when a repair makes more sense than a replacement, and we can source Ameristar-spec hinges, glides, and touch-up materials without waiting on a factory channel. Every crew member is background-checked, identity-verified, and you’ll get their name and photo before they arrive, plus a photo ID badge at the door. That’s the Threshold Standard, and we hold to it on every job.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Fresno
These are the issues we see most often when we open up Ameristar cabinets in Fresno homes. Each one gets worse with our climate or the age of our housing stock.
- Hinge and drawer glide fatigue in dry summer heat. Ameristar frameless boxes are built tight and true, but after a few Fresno summers with 100°F-plus days and single-digit humidity, doors start sagging and glides bind. The fix is usually shimming, adjusting, or replacing worn hinge hardware, not a whole cabinet reorder.
- Thermofoil and laminate door faces bubbling or peeling near heat and steam. We see this on some Ameristar series around ovens and dishwashers, especially in older Fresno kitchens without proper ventilation. Once the laminate separates from the substrate, the door face needs replacement or refacing.
- Cabinet box warping and joint separation in garages and non-climate-controlled spaces. The Central Valley heat swings are brutal, and cabinets stored or installed in unconditioned spaces will move. Joints open, boxes go out of square, and doors stop lining up.
- Sink-base and dishwasher-adjacent panels swelling from slow leaks. Fresno’s 1950s – 70s housing stock often still has original supply lines, and small leaks go unnoticed until the particleboard swells and the panel turns soft. We find this constantly.
- Doors and drawers out of alignment on settled slab floors. Pre-1980 slab-on-grade homes in Fresno settle with the original grading, and that slope travels up through the base cabinets. Doors rub, drawers don’t glide, and counters read as uneven.
Ameristar Service in Fresno: What Local Conditions Mean for Your Equipment
Here’s the thing about Fresno that shapes every Ameristar install we do: our pre-1980 slab-on-grade homes have floors that slope with the original grading. That is not a defect. It’s just what happens when a house sits on a concrete slab for fifty or sixty years. But it means Ameristar base cabinets often need scribed filler and shimming at the toe kick rather than sitting level out of the box. That’s different from bench-built installs in cities with raised foundations, where the floor is framed lumber and movement shows up differently. In the Fig Garden area near Van Ness Boulevard, we replaced an Ameristar Selby kitchen where the slab had settled roughly 5/8 inch across the run, sagging every base door. We shimmed and scribed the new boxes to a laser line, reused the original layout, and set quartz tops over the corrected cabinet plane. The homeowner got doors that close square and stone that reads as one flat surface. A contractor who doesn’t know Fresno slabs will set those boxes level to the floor and send the problem right into the countertops.
Ameristar Models & Products We Service in Fresno
We work on the full Ameristar range: Wayne Highlands, Barnett, Selby, and Carriage House. Wayne Highlands and Barnett are common in Fresno’s tract homes, while Selby and Carriage House show up in larger kitchens near Van Ness Extension and north Fresno. Our approach on parts is simple. We source Ameristar-spec hinges, glides, and touch-up materials from suppliers who carry the same profiles, and we substitute quality aftermarket hardware only where it improves longevity. If your boxes and face frames are sound, hardware and door replacement usually beats a full reorder. If boxes are swollen or out of square, we price a full replacement honestly, with a written number before any work starts. We keep common hinge and glide profiles on hand for faster Fresno turnaround, and we order special-profile pieces as needed.
Key Takeaways
- We are independent Ameristar service providers in Fresno, not factory representatives or an authorized dealer.
- Fresno’s slab-on-grade homes and dry heat create specific Ameristar failure modes we see and fix regularly.
- You get a written price before any work starts, every time.
- Every completed project carries a written guarantee, and we return free of charge if a repair or installation fails.
- A live person answers your call at (803) 680-2547, 24/7.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fresno
Pricing depends on what you need, and the ranges below cover the most common Ameristar work we do in Fresno. A cabinet repair or hinge replacement lands at the low end. A full kitchen remodel with new cabinets, counters, and backsplash lands at the high end. The fastest way to know your number is to call us for a free estimate. We’ll walk the kitchen, measure, and give you a written, line-item price before you commit to anything.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation (Quartz/Granite) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
No verbal estimates that grow on the final bill. No change orders you didn’t approve in writing. Call (803) 680-2547 for a free estimate, and we’ll give you real numbers for your Ameristar kitchen in Fresno.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fresno
Yes. We source Ameristar-spec hinges, glides, and touch-up materials from suppliers who carry the same profiles used on your cabinet line, and we substitute quality aftermarket hardware only when it improves longevity. If the boxes and face frames are sound, replacing worn hardware is almost always faster and cheaper than a full reorder. Call (803) 680-2547 and we’ll tell you what your cabinets actually need.
In Fresno, it’s usually both. Dry summer heat fatigues hinges and glides over time, and if the original install was on a settled slab floor, the boxes themselves may be out of plane. We check the hinge wear, the box square, and the floor line before deciding whether it’s a hardware swap or a re-level of the bases. We’ll give you a written estimate for either fix.
Yes, it can. Thermofoil and laminate door faces on some Ameristar series bubble or peel near ovens and dishwashers in homes without adequate ventilation, especially through Fresno’s long hot season. Once the laminate separates, the door face needs replacement or refacing. We can match profiles and quote the work accurately. Call (803) 680-2547 for a free look.
We scribe and shim the base cabinets at the toe kick to a laser line, so the cabinet plane is level even when the slab is not. That’s the only right way to do it on Fresno’s pre-1980 slab-on-grade homes. If you set boxes level to the floor, every door racks and the countertop follows the slope. We correct the plane first, then set tops. Estimates are free at (803) 680-2547.
For a small kitchen remodel, plan on $9,000 to $20,000 depending on cabinet condition, countertop material, and whether you change the layout. If the Ameristar boxes are sound and you’re refacing doors and replacing hardware only, you’ll sit at the bottom of that range. We’ll give you a written, line-item price before any work begins. Call (803) 680-2547 to schedule your free estimate.
Service Areas Near Fresno
We serve Fresno and the surrounding communities across the Central Valley. If you’re outside the city, we also handle Ameristar work in Fresno service area coverage, and we can refer Ameristar service in Sacramento or Ameristar service in Miami for out-of-state projects. We also work with clients in Clovis, Madera, Selma, Sanger, and Kerman.
Book Your Ameristar Service in Fresno Today
Know who’s coming, know what it costs, know it’s backed up – everything else is just noise. Call (803) 680-2547 for a free Ameristar cabinet estimate in Fresno, and a live person will answer. We’ll put the price in writing before any work starts, and every completed project carries a written guarantee. 365 days from completion, if the work isn’t right, we make it right at no cost to you.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Fresno since 2004.
