Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Sacramento, CA | Mason Remodeling
We install, repair, and replace Unilock pavers and walls across Sacramento, and we’re an independent contractor, not a Unilock dealer or authorized partner. That independence shapes how we build: no pressure to push product you don’t need, just a straight read on what your base, drainage, and units actually require here. Sacramento’s expansive clay and wet-dry cycles punish shallow base work faster than most owners expect, so we build deeper than the manufacturer’s minimum and verify drainage before a single paver goes down. Call (803) 680-2547 for a free estimate on any Unilock driveway, patio, or walkway project.
Why Sacramento Residents Choose Us for Unilock Service
We’ve handled Unilock Brussels Block, Beacon Hill, Umbriano, and Pisa2 installations across the valley, and we know how each line behaves in Sacramento conditions, including Unilock repair in Elk Grove. That matters because a paver that looks great in a showroom can look rough after two seasons of Sacramento clay heaving and storm runoff if the base wasn’t built for this soil. Isaac Pruett, our owner, grew up watching his dad do finish carpentry, and that same eye for what’s square and true carries into how we set base, grade, and edge. We use OEM Unilock units for any visible surface so color and dimension stay consistent, and quality aftermarket base, edging, and polymeric sand where performance is equal or better. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Sacramento
- Efflorescence on Brussels Block and Beacon Hill. Sacramento’s wet winters pull soluble salts up through the paver, and when the dry summer hits, those salts stay on the surface as a white haze. We see it most on charcoal and tan units. We clean it properly and can advise on sealing that actually works here, not just a coating that fails in September.
- Settlement and rutting in driveways. In older Sacramento neighborhoods, many Unilock driveways were installed over four inches of base on expansive clay with no geotextile. After a couple of wet winters, pavers rut and heave, especially near the garage apron. We lift, re-excavate to the right depth, and rebuild so the surface stays flat.
- Shifting and joint sand loss after heavy rain. Polymeric sand applied too thin or in the wrong temperature window washes out in Sacramento’s storm events, and then pavers start to drift. We re-sand with the correct product and depth, and we check the grade so water moves away instead of pooling.
- Edge restraint failure and paver creep. Plastic edge restraint next to lawns or planting beds flexes over time, and pavers begin to slide outward. We replace plastic with a concrete curb where the design calls for it, which is the only thing that holds a Sacramento paver edge through repeated wet-dry cycles.
- Base failure from poor drainage. In flat areas like Natomas, water that doesn’t drain away from the paver surface saturates the base and accelerates failure. We correct the grade and add drainage at the same time we rebuild, so you’re not paying for the same repair again in three years.
Unilock Service in Sacramento: What Local Conditions Mean for Your Equipment
Sacramento’s expansive clay and high water table in neighborhoods like Natomas and South Land Park change the rules for Unilock work. The manufacturer’s minimum base specs are written for average soils, but average doesn’t describe what’s under most Sacramento yards. Clay expands when wet and shrinks when dry, and a shallow base over clay will heave and rut within a few seasons. We recently tore out a failing Unilock Brussels Block driveway in Land Park where the original installer had poured four inches of base over clay and skipped geotextile, a common issue our General Contractor in Sacramento team encounters. After two wet winters, the pavers near the garage apron looked like a washboard. We re-excavated to eight inches, added compacted Class 2 aggregate and fabric, relaid the salvaged Unilock units to match the existing color, and finished with a concrete curb and polymeric sand. That driveway now moves water toward the street instead of pooling at the foundation, and it sits flat because the base is built for Sacramento, not for a brochure.
Unilock Models & Products We Service in Sacramento
We service Unilock Brussels Block, Beacon Hill, Umbriano, and Pisa2 / Il Campo across Sacramento. Brussels Block and Beacon Hill dominate older Sacramento driveways and patios, so we keep a working familiarity with their color blends and dimensional tolerances to match additions or repair sections without visible patchwork. Umbriano’s smooth face and tighter joints show color differently after weather exposure, and we account for that when matching. For visible surfaces, we use Unilock OEM units to keep color and size consistent. For base, edging, and polymeric sand, we spec aftermarket products that hold up better in Sacramento’s clay and drainage conditions than whatever the original installer happened to use.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Sacramento
| Service | Typical Price Range in Sacramento |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives cost is base depth, drainage work, access for excavation, and whether we’re recovering existing Unilock units or ordering new. A free estimate means we walk the site, check the grade, note any clay or drainage issues, and give you a written price before any work starts. For an exact quote on Unilock work in Sacramento, call (803) 680-2547.
Serving Sacramento, CA - Our Local Coverage Area
We’re based in the Sacramento area and know this community well, from Sacramento Bathroom Remodeling to hardscape work. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Sacramento
Yes, we can match existing Unilock Brussels Block and Beacon Hill closely enough that the new section reads as part of the original. We use OEM Unilock units for visible surfaces, and because we’ve installed and repaired these lines across Sacramento for years, we know how their color blends and dimensions shift, so we order and lay accordingly. Call (803) 680-2547 and we’ll walk your existing surface before quoting.
That white chalky residue is efflorescence, and in Sacramento it’s what happens when wet winters pull soluble salts through the paver and dry summers leave them on the surface. It’s common on Unilock Brussels Block and Beacon Hill in charcoal and tan. We can clean it and recommend a sealing approach that works with Sacramento’s wet-dry cycle instead of a coating that fails by Labor Day. Call (803) 680-2547 for an assessment.
No, but they do need a roughly eight-inch compacted Class 2 aggregate base with geotextile fabric, not the four inches some installers get away with elsewhere. Sacramento’s expansive clay heaves when wet and shrinks when dry, and without proper depth and drainage, the surface fails within a few seasons. We build the base to the depth the soil actually requires, not the minimum that a generic spec sheet allows.
Here in Sacramento, paver driveways typically run $7,000 to $18,000, paver patios $3,500 to $11,000, and full driveway replacement $5,000 to $14,000 depending on size, base depth, drainage work, and whether we reuse existing Unilock units. For an exact line-item quote, call (803) 680-2547 – estimates are free and written before any work starts.
Often yes. If the Unilock units are intact and the failure is in the base, we lift, re-excavate to the proper depth, add aggregate and geotextile, and re-lay the salvaged units to match the existing color. If the base is too far gone, we’ll tell you honestly when full replacement is cheaper over the next ten years. Call (803) 680-2547 and we’ll inspect before recommending.
Service Areas Near Sacramento
Beyond Sacramento, we serve homeowners in and around Los Angeles, San Jose, San Francisco, and Fresno. For Unilock work outside those areas, see our Unilock sales & service page, our Sacramento service area page, Unilock service in Miami, and Unilock service in Long Beach.
Book Your Unilock Service in Sacramento Today
We’ll walk your Sacramento property, check the grade and soil conditions, and give you a written price before any work starts. Call (803) 680-2547 to schedule your free Unilock estimate today.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Sacramento since 2004.
