Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in San Francisco, CA | Mason Remodeling
We provide independent PGT window and door service across San Francisco, handling everything from fogged glass replacement to full impact window installations in the Sunset, Richmond, and hillside neighborhoods. What makes our PGT work here different is that we understand how salt-laden fog and historic-district rules change the repair-versus-replace math. We’re a General Contractor - San Francisco that has installed and serviced PGT products across the city for years, and we give you a written price before any work starts. Call (803) 680-2547 and we’ll walk the job with you.
Quick answer: PGT window replacement in San Francisco typically runs $5,310 – $17,700, while full impact window installation ranges $9,440 – $29,500 depending on size, finish matching, and whether the opening needs reframing. We’re an independent PGT service provider, not manufacturer-affiliated or authorized, and that independence means we recommend the repair or replacement you actually need rather than the one that pads an invoice. Isaac Pruett, our owner, spent two decades remodeling homes across California before building Mason Remodeling into what it is today, and he still checks the trim work on every PGT install before calling it done.
- Written price before any work starts – always, on every PGT job, no exceptions.
- OEM PGT parts where available – rollers, locks, screens, and glass units, with honest aftermarket options when OEM supply is slow.
- 365-Day Done Right Promise – if the work isn’t right within a year of completion, we make it right at no cost to you.
- Background-checked, uniformed technicians – you get the technician’s name and photo before the visit, and a photo ID badge at the door.
Why San Francisco Residents Choose Us for PGT Service
PGT windows and doors are built for impact resistance, but San Francisco throws conditions at them that PGT’s Florida testing never accounted for. We know how PGT aluminum frames corrode in the Sunset’s marine layer, how vinyl sashes behave in uninsulated 1920s and 1940s homes, and how thermal cycling between fog and afternoon sun stresses insulated glass units. That’s earned knowledge, not a brochure line. We’ve pulled PGT WinGuard units out of Outer Sunset row houses and Richmond district flats and seen exactly what decades of salt air does to the hardware.
Isaac Pruett grew up in the Sylmar end of the San Fernando Valley, where half the neighborhood spent weekends fixing what the last guy did wrong. After high school he enrolled in the construction technology program at Los Angeles Trade-Technical College, learning framing, finish work, and how to read a set of plans without guessing. His dad was a finish carpenter, so Isaac still takes it personally when trim work is sloppy – it’s the first thing he checks on every PGT install before he considers it done.
Every crew member follows The Threshold Standard: background-checked, identity-verified, in a clean marked uniform, with a photo ID badge shown at your door. You’ll know their name and see their photo before they arrive. A live person answers our phone 24 hours a day, seven days a week – no call trees, no voicemail loops. Call (803) 680-2547 and you’ll talk to a human who knows PGT products.
Styles & brands we work with
Common PGT Construction Problems We Solve in San Francisco
- Corroded aluminum frames on west-facing elevations. Salt-laden fog and marine air eat at PGT aluminum frames and hardware, especially in the Sunset and Richmond districts where the ocean is close enough to taste. We see corrosion around the weep holes first, then the locks and roller assemblies. Often the glass is fine but the frame needs repair, and we’ll tell you that honestly instead of selling you a full replacement.
- Condensation and water intrusion at vinyl sashes. PGT Wincore 7700 Series vinyl windows in older San Francisco homes with uninsulated walls and interior moisture loads develop condensation at the sash edges, and over time that becomes water intrusion. The fix is often weatherstripping and a drainage check, not a new window, unless the frame has warped from years of moisture cycling.
- Sliding glass door rollers binding and tracks corroding. PGT aluminum sliding doors exposed to wind-driven rain and coastal humidity develop roller bind and track corrosion. You’ll feel it as a scrape or dead spot when the door moves. We replace rollers with OEM PGT parts where available and clean or replace the track so the door glides like it did when it was new.
- Fogged or failed insulated glass units. PGT impact windows after years of thermal cycling between cool fog and sunny afternoons will eventually fail at the seal, and fog between the panes is the tell. In many cases we can replace the glass unit without replacing the entire window, which saves real money and keeps your existing frame in place.
- Mismatched window profiles on historic-district homes. San Francisco’s Residential Design Guidelines and historic-district rules often require replacement windows to match existing profiles, exterior trim, and color. That means custom-order sizing and finish matching that a generic PGT installer won’t quote correctly. We’ve done dozens of these, and we handle the paperwork and the matching so the window looks like it was always there.
PGT Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the thing about PGT products in San Francisco that you won’t find on a generic PGT page. Because San Francisco’s Residential Design Guidelines and historic-district rules often require window replacements to match existing profiles, exterior trim, and color, PGT window installations here frequently need custom-order sizing and finish matching that would not be required in most neighboring cities. A standard off-the-shelf PGT unit won’t fly in Pacific Heights, Noe Valley, or any of the city’s designated historic districts, and even outside those zones, planning staff often ask for documentation that the replacement matches the original character. That means lead times run longer here, and “just swap in a new window” is rarely the actual job description. We quote the custom-order sizing, the finish matching, and the timeline up front, in writing, so you’re not surprised three weeks into the project. This is the difference between a contractor who has done PGT work in San Francisco and one who just has PGT on their website.
PGT Models & Products We Service in San Francisco
We service the PGT WinGuard Aluminum impact-resistant window line, the PGT WinGuard Vinyl impact window line, the PGT Wincore 7700 Series vinyl windows, and PGT Aluminum Series sliding glass doors. For repairs, we use OEM PGT replacement parts where available for rollers, locks, screens, and glass units, and high-quality aftermarket components when OEM supply is slow or discontinued. If a PGT window or door has failing glass seals, corroded frames, or repeated hardware failures, we give an honest repair-vs-replace recommendation rather than defaulting to full replacement. Our focus areas include window replacement, impact window installation, and full kitchen remodeling, which means we can handle the window work and the surrounding renovation in one coordinated job. For more on our PGT depth, see our PGT sales & service page.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in San Francisco
What drives the cost of PGT work in San Francisco is the size of the job, the condition of the existing frames, whether you’re in a historic district, and whether the opening needs reframing. A straightforward double-hung replacement in a non-historic neighborhood is a different price than a custom-matched WinGuard install in a landmark district. Here’s what you can expect, based on our recent San Francisco jobs:
| Service | Typical Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Backsplash Installation | $945 – $2,950 |
| Countertop Installation | $2,360 – $7,670 |
| Cabinet Installation | $4,720 – $15,340 |
Every quote includes a written, line-item price before any work starts – no verbal estimates that grow on the final bill. Your free estimate covers measuring, a condition assessment, and a plain-language recommendation on whether to repair or replace. Call (803) 680-2547 and we’ll schedule it.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in San Francisco
In most cases, yes, we can replace just the glass unit if the frame is sound and the hardware still works. If the frame has corroded or the sash is warped, replacement is the honest call. Call (803) 680-2547 and we’ll assess it in person – the estimate is free.
Yes, and we see it most on west-facing facades in the Sunset and Richmond districts, where marine air and fog sit on the metal. Corrosion starts at the weep holes and hardware, not the glass. Regular cleaning and hardware lubrication extend the life, and we’ll show you what to watch for.
Often, yes. San Francisco’s Residential Design Guidelines and historic-district rules require replacement windows to match existing profiles, trim, and color, which means custom-order PGT units in many cases. We handle the matching and the paperwork, and we’ll tell you on the first visit whether your address triggers review. Call (803) 680-2547 for a free evaluation.
Yes, and that’s a common path for a San Francisco Bathroom Remodeling project. We’ll work around the existing PGT windows, or replace them during the remodel if they’ve reached the end of their useful life. In the Outer Sunset, we replaced a set of fogged PGT WinGuard aluminum windows in a 1940s row house where coastal fog had corroded the frames and the original glass seals had failed. We matched the existing trim depth, upgraded the hardware, and installed new PGT impact units so the home could keep its street-facing look while cutting drafts and condensation. The homeowner also had us reframe and re-tile the adjacent kitchen backsplash while the windows were out, using Cambria quartz and a simple subway tile that suited the small galley layout. One crew, one written price, one coordinated job.
We use OEM PGT replacement parts where available for rollers, locks, screens, and glass units, and high-quality aftermarket components when OEM supply is slow or discontinued. For older PGT models, some parts are no longer manufactured, and we’ll tell you that plainly and recommend the best alternative. Call (803) 680-2547 and we’ll check availability for your specific model.
Service Areas Near San Francisco
We serve San Francisco and the surrounding Bay Area, including San Jose, Sacramento, and clients in Fresno. For PGT work outside the city, see our PGT service in Fresno and PGT service in Sacramento pages, or our San Francisco service area page for coverage details.
Book Your PGT Service in San Francisco Today
Call (803) 680-2547 to schedule your free estimate. We’ll send a background-checked, uniformed technician with a name, a photo, and a written price before any tool is unpacked. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Written by Isaac Pruett, Owner at Mason Remodeling, serving San Francisco since 2004.
