







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Los Angeles Owner’s Guide
Oldcastle paver replacement in Los Angeles typically runs between $4,130 and $12,980 for a patio area and $8,260 to $21,240 for a full driveway, including tear-out of failed sections, base repair, and reinstallation. We stock Oldcastle-compatible pavers and keep common Los Angeles patterns on hand, so most call-outs get priced and scheduled within a few days, not weeks. You usually discover the problem the same way every homeowner does: you walk out to the driveway after a rain and see a paver sunk half an inch, or you notice the edge row has started creeping into the lawn, or a single cracked paver has turned into a spiderweb of shifting stones. It starts small, then it spreads.
Which Oldcastle Models This Applies To
Oldcastle manufactures pavers under several product lines that show up constantly across Los Angeles driveways, patios, and walkways. The most common we see are the Holland Stone, Cobble Paver, and the larger Plaza Stone lines, but Oldcastle also produces retaining wall block and permeable paver systems that share matching dimensions. Here’s the compatibility gotcha most homeowners don’t know: Oldcastle pavers are made in regional plants, and the Los Angeles market stock often differs slightly in color blend and thickness from what you’d find in a big-box store or online. A paver labeled “Charcoal Holland” from an Arizona plant will not match the one poured in the California facility. If you’re trying to patch a section, we need the paver’s actual measurements (Holland Stone runs 60mm thick; many driveway-rated pavers run 80mm), and ideally a photo of the existing color blend next to a coin for scale. For older Oldcastle installations from the 1990s and early 2000s, the original color blends are frequently discontinued. In those cases, we pull from our supplier network to find the closest available match, or we rework the damaged section into a deliberate pattern shift so the new pavers read as intentional rather than mismatched. On the OEM versus aftermarket question: for Oldcastle specifically, we recommend staying with Oldcastle or a same-spec paver from a matching regional plant. Off-brand pavers with the same nominal dimensions often differ by a millimeter or two in chamfer or height, and over a 400-square-foot Los Angeles driveway, that difference becomes a visible ripple. Mason Remodeling is an independent service provider and not affiliated with Oldcastle, but we work directly with their regional distribution network to source authentic product.
Styles & brands we work with







Signs Your Oldcastle Driveway & Pavers Is Failing
- Sunken paver sections, especially near the driveway apron. This is almost always base failure underneath. Los Angeles clay soil expands and contracts with moisture, and if the original installer skimped on the crushed rock base, the pavers settle unevenly within a few seasons.
- Edge pavers separating from the border and tipping outward. The edge restraint has failed. It’s usually a plastic paver edging that got brittle in the Southern California sun, or it was spiked too shallow. Once the edge lets go, the whole field starts to drift.
- White, chalky haze across the paver surface. Efflorescence. It’s not structural damage, but it tells you water is moving through the paver and the sand joints are no longer locking properly. In Los Angeles’s dry-wet cycles, this gets worse, not better.
- Cracks running through multiple pavers in a line. This is a structural issue, often a tree root from a nearby ficus or liquidambar (both common in Los Angeles neighborhoods like Encino and Northridge) pushing up from below, or a vehicle load the base wasn’t rated for.
- Sand washing out of the joints after every rain. Los Angeles doesn’t get much rain, but when it does, it’s a test. Missing joint sand means the pavers are grinding against each other, chipping edges, and losing their interlock.
Replacement Cost & What’s Included
For Oldcastle driveway and paver work in Los Angeles, here’s what we quote. A paver patio runs $4,130 to $12,980 installed, depending on square footage, access, and whether the base needs a full rebuild or just spot repair. A full paver driveway runs $8,260 to $21,240, with the higher end covering tear-out of a failed base, new compacted aggregate, fresh sand, and re-laying every paver. Driveway replacement, when the pavers themselves are too damaged to reuse, falls between $5,900 and $16,520. Driveway sealing, which we recommend every three to five years in Los Angeles to protect against UV fading, runs $295 to $825. We deliver the written price before any work starts, not after, and it includes the pavers, base material, disposal, labor, and a written guarantee covering the installation for 365 days from the completion date. If a repair or installation fails within that year, we return and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Pavers are one of the few exterior materials where selective DIY can work, but the failure point is almost never the paver itself. What you can safely check: whether the sand joints need topping off, whether water is pooling anywhere, whether an edge restraint is visible and intact. What goes wrong with DIY: pulling up twenty pavers and putting them back without re-compacting the base means they’ll sink again inside a year. Digging up a base without understanding load rating means your driveway will crack under a delivery truck. And matching an Oldcastle color blend by eye from photos on your phone is how you end up with a patchwork driveway you’ll look at every day for a decade. If the base is solid and it’s a sand-and-edge fix, a careful homeowner can handle it. If pavers are moving, cracking in a line, or the base material is washing out, call us at (803) 680-2547 before you dig. We’d rather give you an honest assessment than watch you inherit a bigger repair.
Key Takeaways
- Oldcastle paver patio replacement in Los Angeles: $4,130 to $12,980 installed.
- Oldcastle paver driveway installation: $8,260 to $21,240 installed.
- Most failures trace to base preparation, not the paver itself.
- Color blends are regional – Los Angeles Oldcastle stock doesn’t always match out-of-state product.
- Mason Remodeling carries Oldcastle-compatible pavers and sources authentic product through regional suppliers.
FAQs
Oldcastle pavers typically last 25 to 40 years in Los Angeles when the base was built correctly and the joints are re-sanded and sealed as needed. The pavers themselves rarely fail first; it’s the base, edge restraint, or sand that degrades. Our 365-Day Done Right Promise covers the installation we do for a full year, and most of our Los Angeles paver replacements are fixing the original base, not the pavers. Call (803) 680-2547 for an exact assessment.
Yes, spot repair works when the base is still sound and only a section of pavers is damaged or settled. We lift the affected pavers, re-grade and compact the base, and re-lay the originals with fresh sand. If the base has failed across a large area or multiple sections are moving, a partial repair just moves the problem around. Call us at (803) 680-2547 and we’ll tell you which one you have before you spend a dollar.
A typical Los Angeles paver patio or driveway section takes one to three days on site, depending on access and the extent of base rebuild. Weather rarely delays us, but underground surprises like old tree roots or a buried sprinkler line can add time. We’ll give you a schedule in the written price, and a live person answers our phone 24 hours a day, seven days a week, so you’ll never wait until Monday to get a status update.
We stock the most common Oldcastle patterns and colors used across Los Angeles, including Holland Stone and Cobble blends, and we source less common or discontinued product through Oldcastle’s regional distributors. We’ll match what you have or tell you honestly if an exact match isn’t possible and what your best options are. Call (803) 680-2547 with a photo and measurements, and we’ll start there.
Call Mason Remodeling for Oldcastle Driveway & Pavers in Los Angeles

If you’ve got a failing Oldcastle driveway or paver area, don’t let it get worse through another Los Angeles rain season. Call Mason Remodeling at (803) 680-2547 for a free estimate. You’ll get a written price before any work starts, a scheduled date, and the name and photo of the technician coming to your door, along with their photo ID badge on arrival. That’s the Threshold Standard on every job, and it applies to every paver repair and replacement we do. Whether you’re patching a sunken section or rebuilding the whole driveway, we’d rather show you the numbers on paper than have you guess. Isaac Pruett still checks the edge lines on every paver job personally before we call it done. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Written by Isaac Pruett, Owner, Mason Remodeling at Mason Remodeling, serving Los Angeles and nearby areas.


