Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Los Angeles Owner’s Guide
A full KraftMaid bathroom remodel in Los Angeles typically runs $10,620 – $33,040 installed, depending on vanity size, cabinet configuration, and whether we’re pulling permits for plumbing or electrical moves. We stock KraftMaid-compatible cabinet parts, hinges, drawer slides, and door fronts on our trucks, which means most component failures get resolved in a single visit. The pattern we see most often: homeowners call us after a drawer front has loosened, a hinge has sagged under years of humidity, or a cabinet box has started pulling away from the wall near a shower. Los Angeles water is hard, bathrooms get humid, and cheap aftermarket hardware gives up faster than the original KraftMaid components ever did.
Key Takeaways:
- Full KraftMaid bathroom remodels in Los Angeles run $10,620 – $33,040 installed
- Cabinet-facing parts (hinges, slides, drawer fronts) cost far less than full box replacement
- We verify your KraftMaid series before ordering any component, so you don’t pay for a wrong part twice
- Every job gets a written price before work starts, and it’s backed by our 365-Day Done Right Promise
Which KraftMaid Models This Applies To
KraftMaid builds across several lines: the builder-grade Vantage series, the mid-range Venicia and Benton lines, and the semi-custom KraftMaid Cabinetry line that shows up in higher-end Los Angeles bathroom remodels. The compatibility gotcha that trips people up is door profile spacing. KraftMaid hinge cups are drilled at standard 35mm bore spacing, but older Vantage cabinets built before 2012 used a 9.5mm offset on face-frame doors, while newer models sit at 6mm. A hinge that’s “close enough” will bind or leave a visible gap at the top corner. We measure the bore spacing and the overlay before ordering anything.
OEM KraftMaid parts carry a limited lifetime warranty on hinges and drawer glides, which matters more than most people think in a bathroom. The aftermarket equivalents we see on parts sites are cheaper, but they’re often zinc-plated rather than nickel-plated, and in a Los Angeles bathroom that sees daily steam, zinc corrodes within two to three years. For cabinet boxes, drawer fronts, and door styles, we always match OEM KraftMaid color codes for the specific line because their painted finishes have shifted slightly over production years, and a mismatched panel panel stands out immediately. If you can find the white manufacturing label inside the cabinet door with the series code, that saves us a step.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer fronts sag when open. The undermount slides have worn at the rear catch, or the front screws have stripped in MDF. KraftMaid’s full-extension slides last a long time, but once they start catching mid-pull, replacement beats adjustment every time.
- Cabinet doors won’t stay closed. The spring in the self-close hinge has given out. This is the single most common KraftMaid failure we see in humid Los Angeles bathrooms, particularly in homes near the coast where salt air accelerates metal fatigue.
- A gap opens at the cabinet’s top corner where it meets the wall. The box is pulling away, usually because the original installer anchored into drywall without hitting a stud. We see this a lot in older Los Angeles homes where wall framing is less predictable than newer construction.
- Soft-close drawer slams shut. The dampening piston inside the slide has failed. Some owners live with it for years, not realizing it’s a ten-minute part swap if you have the right KraftMaid slide on hand.
- Finish is peeling or blistering near the sink. Moisture’s gotten under the clear coat. Once that starts, the MDF underneath swells and the door is done. Matching the finish means matching the series and production year, which is why we ask for photos before ordering.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cabinet component repair in Los Angeles runs $945 – $3,540 for hinge, slide, and drawer front replacement, including parts and labor. A full vanity replacement starts at $5,900 – $14,160 for a small bathroom, while a complete KraftMaid bathroom remodel with custom cabinetry, countertop, shower glass, and tile runs $10,620 – $33,040. What moves the number is cabinet size and configuration, whether we’re replacing a single vanity or a double, and whether plumbing or electrical has to move. The parts themselves are the small piece; the labor to hang, level, shim, and finish a cabinet box properly is where a craftsman either earns his rate or you find out why the cheapest bid was cheap.
We deliver a written price before any work starts. No verbal estimate that grows on the final bill. The price includes all parts, labor, haul-away of the old components, and cleanup of the jobsite. Every KraftMaid bathroom project is backed by our 365-Day Done Right Promise: if something isn’t right within one year of the completion date, we return and make it right at no cost to you. You’ll know who’s coming before we arrive. We operate under the Threshold Standard, which means every crew member is background-checked, identity-verified, and you receive their name and photo before the visit. They show up in a clean marked uniform with a photo ID badge at the door.
DIY or Call Us?
You can safely check a few things before calling. Open the cabinet door, look at the hinge plates, and read the manufacturer label inside the cabinet. That label tells us everything we need to order the right part. If a hinge screw has come loose, you can snug it with a screwdriver, but do not overtighten into MDF or you’ll strip the hole and turn a five-dollar fix into a door replacement.
Beyond that, we’d recommend leaving KraftMaid cabinet work to someone who has done it before. The screws used for KraftMaid hardware are metric in many models, mix-and-match hardware doesn’t sit flush, and trying to force an imperial screw into a metric cup hinge ruins the door. There’s also the finish-matching problem: if we’re replacing one door front, the color code has to be exact or you’ll see the difference every time you walk into the bathroom. What takes us forty minutes has a way of turning into a weekend that ends with a call anyway. Isaac Pruett grew up watching his dad, a finish carpenter, refuse to let trim work leave the shop until it was dead right. We take that same approach with every KraftMaid component we touch: if it’s not right, it doesn’t leave.
If your KraftMaid parts are failing and you want to know exactly what the fix will cost, call (803) 680-2547.
FAQs
KraftMaid cabinets installed in a well-ventilated Los Angeles bathroom last 20 to 30 years, but hinges and drawer slides typically need replacement between year 8 and 15 because bathroom humidity and hard water residue accelerate metal wear. A well-installed cabinet box, properly anchored to studs and sealed at the edges, will outlive multiple sets of hardware. Call (803) 680-2547 and we can tell you over the phone whether your issue is hardware or structural.
Hinges and drawer slides are replaced, not repaired; once the internal spring or damping piston fails, there is no reliable rebuild. Door fronts and cabinet boxes can sometimes be repaired if the damage is minor, but finish-matched replacement is usually the better call. We’ll give you an honest recommendation either way, with the price in writing before anything’s ordered.
Most hinge, slide, and drawer front replacements take under two hours once we have the correct KraftMaid part in hand. Full vanity replacement typically takes one day, and a complete bathroom remodel runs one to three weeks depending on scope and permit requirements in Los Angeles. Call (803) 680-2547 for a timeline specific to your project.
We stock common KraftMaid hinge styles, drawer slides, and mounting hardware on our service vehicles, which lets us resolve most component failures in a single trip. Custom door fronts, finished panels, and full cabinet boxes are ordered by series code and color match after we inspect your existing cabinetry. Mason Remodeling is an independent Los Angeles remodeling company and is not affiliated with KraftMaid, but we’ve worked with their cabinet lines, along with Cambria, Silestone, and Kohler fixtures, for years.
Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Written by Isaac Pruett, Owner, Mason Remodeling at Mason Remodeling, serving Los Angeles and nearby areas.
