Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Los Angeles Owner’s Guide
Jerith kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 for a full project, depending on cabinet run length, countertop material, and whether walls or plumbing move. We stock parts and materials compatible with Jerith aluminum-framed kitchen systems, and we can usually get eyes on your specific failure within one business day. Most owners discover the problem the same way: a cabinet face loosens, a frame corner separates, or a drawer glide that worked fine for a decade starts grinding and locking up.
Jerith’s aluminum cabinet framing is known for holding up well in dry Southern California weather, but the hardware and connectors take a beating over time. We’re an independent service provider, not affiliated with Jerith, which means we can source OEM-spec parts or quality aftermarket equivalents without being tied to one supply chain. If you’ve got a Jerith kitchen showing its age in Los Angeles, here’s what to know before you spend a dime.
Which Jerith Models This Applies To
Jerith built several kitchen cabinet and trim lines over the years, and the aluminum framing series is the one we see most often in Los Angeles homes from the 1980s through early 2000s. The trick with Jerith is identifying the frame profile. Look inside any cabinet door for a foil label with a serial or model code. If the label is gone, measure the aluminum rail width: the original residential line used 5/8-inch face frames, while the later builder-grade line dropped to 1/2-inch. That measurement alone tells us which connector set and door hinges to pull.
The older 5/8-inch frames use a corner connector that Jerith discontinued years ago. That’s the single biggest compatibility gotcha for Los Angeles owners: the connector looks close enough to a standard aftermarket one, but the channel depth is different by about 2 millimeters, which means the corner won’t seat flush. We keep both profile sizes in our parts stock, and we can match worn drawer glides to the original mounting pattern so nothing gets redrilled that doesn’t need to be. When OEM parts are unavailable, we spec aftermarket connectors machined to the correct channel depth, not the generic ones that wobble loose in six months.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Cabinet door corners are visibly separating. The aluminum corner connectors have fatigued or cracked. In Los Angeles, temperature swings between day and night cause aluminum to expand and contract at a different rate than the hardware, and after 15 to 20 years the corner joint is the first casualty.
- Drawers bind or drop on one side. The nylon roller guides or ball-bearing slides have worn past adjustment. You’ll hear a metallic grind right before the drawer starts catching, and once the roller flat-spots, the drawer will sag toward the face.
- Hinges snap or pull out of the frame. The screw bosses inside the aluminum rail are stripped, or the hinge itself has developed play. Jerith’s aluminum extrusions are thin where the hinge screws thread in, and over-tightening during a past repair is a common cause we find.
- Countertop seam opens along the cabinet run. The substrate under the seam has settled or swelled. In Los Angeles kitchens, years of steam from cooking plus dry air cycles gradually break the adhesive bond, and the seam becomes the tell that the underlayment needs attention before the top cracks.
- Soft-close mechanisms stop catching. The dampener inside the hinge or drawer slide has leaked its internal fluid. This part wears predictably, usually around year 10 on heavy-use doors. Once the dampener is dead, the door will slam no matter how slowly you close it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith kitchen remodel in Los Angeles runs $16,520 to $53,100. That covers demolition of the old cabinets and countertops, new cabinet installation, countertop fabrication and installation, backsplash, sink and faucet hookup, and finish trim. If you’re replacing only what’s failed, smaller scopes come in lower: cabinet installation alone lands between $4,720 and $15,340, countertops run $2,360 to $7,670, and backsplash work budgets at $945 to $2,950.
What moves the price in Los Angeles is mostly cabinet run length, countertop material choice, whether plumbing or electrical needs relocating, and whether your building requires additional structural or fire-safety compliance work. We write a fixed line-item price before any work starts, so the number you approve is the number you pay. Your written guarantee covers the work for 365 days from the completion date. If a cabinet corner loosens or a glide fails within that year, we return and fix it at no charge.
DIY or Call Us?
A homeowner can safely check a few things: tighten hinge screws that are only slightly loose, clean gummed-up drawer glides with a dry brush, and confirm whether a soft-close dampener is visibly cracked. That’s about where safe DIY ends on aluminum-framed Jerith cabinets. Stripped screw bosses in the frame need to be re-tapped or replaced, not filled with wood glue and hope. Forcing a generic corner connector into the wrong channel depth bends the aluminum, and once the frame rail is deformed, the whole cabinet face stops being square. At that point you’re spending more on a fabricator than you saved by skipping us.
If the corner has separated far enough that the door hangs crooked, the frame has to come off, get disassembled, and be rebuilt with the correct connectors. We do that work in our shop or on-site in greater Los Angeles, and the result is a cabinet face that sits plumb again instead of a repair that looks fine until the third time you open it. Call (803) 680-2547 and we’ll walk you through what you’re seeing before we even schedule the visit.
What This Costs in Los Angeles: Key Ranges
- Full kitchen remodel: $16,520 – $53,100
- Cabinet installation only: $4,720 – $15,340
- Countertop replacement: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
FAQs
Jerith aluminum-framed cabinets typically last 20 to 30 years in Los Angeles before the hardware and connectors need systematic replacement. The frames themselves hold up better in our dry climate than in humid regions, but the nylon glides, soft-close dampeners, and corner connectors wear out on a predictable schedule. Call (803) 680-2547 if you’re in year 15 or later and starting to see failures.
Yes, a separated Jerith cabinet corner can usually be repaired by disassembling the frame, installing the correct channel-depth connector, and squaring the cabinet before retightening. We perform this repair regularly in Los Angeles and back it for 365 days from completion. Call us for an exact quote once we see the frame profile.
A full Jerith kitchen remodel in Los Angeles typically runs 4 to 8 weeks from demolition to final trim, depending on countertop fabrication lead times and whether plumbing or electrical moves. A focused repair like corner rebuilding or hinge replacement is usually a single-day job. We’ll put the timeline in writing before any work starts.
We keep both the 5/8-inch and 1/2-inch Jerith aluminum frame connectors, replacement hinges, drawer glides, and soft-close dampeners stocked in our Los Angeles vehicles, along with quality aftermarket equivalents when OEM is no longer made. We can also match materials from KraftMaid, Cambria, and Silestone if your remodel includes those lines. Call (803) 680-2547 and tell us the frame measurement; we’ll confirm what we can bring on the first visit.
Written by Isaac Pruett, Owner, Mason Remodeling at Mason Remodeling, serving Los Angeles and nearby areas.
