Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Francisco, CA | Mason Remodeling
Mason Remodeling provides independent CWS cabinet installation, repair, and refacing across San Francisco. We’re not a manufacturer-authorized service center, and that’s the point: we can source genuine CWS hardware when it matters and custom aftermarket components when CWS has discontinued a profile. Homeowners here face a specific problem most cabinet companies never talk about: San Francisco’s Victorian and Edwardian homes are rarely square, and CWS cabinets installed into out-of-plumb walls fail differently than those in newer construction. Call (803) 680-2547 for a free estimate that accounts for the actual condition of your walls, not a showroom fantasy.
Why San Francisco Residents Choose Us for CWS Service
We’ve worked on hundreds of CWS installations across this city, from compact Sunset kitchens where every inch counts to full Edwardian remodels in Noe Valley. Isaac Pruett, our owner, grew up watching his finish-carpenter father check trim work with a level and a critical eye, so he still treats sloppy cabinet fitting as a personal offense. That matters when you’re scribing CWS Concord or Bristol cabinets into a 1908 wall that leans six degrees out of square. Because we’re independent rather than tied to one manufacturer, we can match any CWS cabinet door, drawer system, or finish while also coordinating with Cambria, Silestone, and Kohler for a complete kitchen or bath. Learn more about our broader CWS sales & service approach, then call us at (803) 680-2547.
Styles & brands we work with
Common CWS Construction Problems We Solve in San Francisco
Here’s what we actually find when we open up CWS cabinet installations in San Francisco homes:
- Marine-layer delamination on door edges and toe-kicks. CWS cabinets use quality materials, but years of fog-driven humidity in the Sunset and Richmond districts can cause edge banding to lift and MDF toe-kicks to swell. We replace delaminated components with moisture-rated stock and reseal edges before reinstallation.
- Out-of-plumb wall gaps on Victorian and Edwardian installs. When a CWS Concord or Lancaster run was installed into a non-rectangular opening without scribing, you get gaps at the ceiling line, doors that bind, and drawers that slide open on their own. We pull the affected cabinets, shim and scribe properly, and rehang them true.
- Water damage from slow sink and drain leaks. In older San Francisco homes with original galvanized plumbing, a pinhole leak behind a CWS base cabinet can go unnoticed for months. By the time a homeowner sees the warped door, the toe-kick and cabinet floor are often gone. We replace the compromised boxes rather than patch them.
- Discontinued CWS door profiles and finishes. CWS has retired certain lines over the years. When a door is damaged beyond repair and the original profile is no longer made, we source custom aftermarket fronts that match the existing finish and bore pattern, so you don’t have to replace an entire run for one door.
- Soft-close hinge and drawer glide failures. We stock genuine CWS replacement hinges and glides. In San Francisco kitchens, the constant temperature swings and humidity cycles accelerate wear on moving hardware. Replacing a $12 glide beats replacing a $300 drawer box every time.
CWS Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s Victorian and Edwardian building stock means CWS cabinets are frequently installed into non-rectangular, out-of-plumb wall openings. A wall that looks straight to the eye can be off by an inch or more corner to corner, and standard cabinet boxes don’t bend to accommodate that. In tract-home cities like Daly City, framing is consistent and square, so installation is straightforward. Here, every cabinet run in a pre-1940 building requires scribing, shimming, and custom fillers to sit flush, which is why San Francisco bathroom remodeling demands different expertise than in newer cities. When a CWS installation was done without those steps, doors bind at the top, gaps open at the ceiling, and countertops rock on uneven bases. We check every run with a four-foot level before we quote, because the wall condition determines whether you need a simple re-leveling or a full pull-and-reset. This is the difference between a kitchen that works and one that fights you daily.
CWS Models & Products We Service in San Francisco
We service all major CWS cabinet lines: the Concord series, Bristol series, Lancaster series, and Tremont series. For repairs, we stock genuine CWS replacement hinges, drawer glides, and touch-up finishes at our San Francisco service vehicle, which means most hardware fixes happen in a single visit. For doors or drawer fronts where CWS has discontinued a profile, we source custom aftermarket components that match the existing finish and bore pattern. If a CWS box is structurally compromised by water or pest damage, we recommend full replacement rather than patching, since repair costs quickly approach the price of a new cabinet run. Our independence means we can also pair CWS boxes with Cambria or Silestone countertops without playing phone tag between two suppliers.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Francisco
Here are the price ranges for CWS-related work in San Francisco. These are honest, market-calibrated ranges based on real labor rates and material costs here, not national averages that don’t reflect what it costs to work in this city:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $16,520 – $53,100 |
| Cabinet Installation | $4,720 – $15,340 |
| Quartz & Granite Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
Your final number depends on the condition of your walls, the CWS line you’re installing, and whether we’re doing a simple re-level or a full tear-out. Every estimate is free and in writing before any work starts. Call (803) 680-2547 to schedule yours.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Francisco
Yes. When CWS has retired a door profile or finish, we source custom aftermarket fronts that match the existing color, grain, and bore pattern. We’ve done this enough times across San Francisco that we keep a library of historic CWS finishes for reference. If you need just one door rather than a full run, call (803) 680-2547 and describe what you have, we’ll tell you honestly whether matching makes sense or full replacement is the better spend.
San Francisco’s fog-driven humidity, especially in the Sunset and Richmond, accelerates edge-band lifting and MDF swelling if the cabinets were installed without adequate sealing. We replace compromised components with moisture-rated materials and reseal edges on every repair. If you’re seeing peeling edges or doors that stick in summer, call (803) 680-2547 for an assessment before the damage spreads.
Yes, and that’s where most of our CWS work happens. We scribe and shim every cabinet run to match the actual contours of your walls. That’s what a proper install requires in a Victorian or Edwardian, and it’s the difference between cabinets that sit flush and doors that bind within a year. Your free estimate includes a wall assessment, not just a cabinet price.
Refacing typically runs 30 – 50% of what full replacement costs, depending on the CWS line and the condition of the boxes. If your cabinet boxes are structurally sound, refacing is the smart play. If water damage or pest damage has compromised the box, replacement is the honest call, and we’ll tell you which one applies before you spend a dollar. Call (803) 680-2547 for a written, itemized quote.
Yes, and we do it regularly. Because we’re independent, we coordinate CWS cabinetry with Cambria, Silestone, or Caesarstone tops in one project timeline. That means one estimate, one crew, and one point of contact. Call (803) 680-2547 to schedule a free estimate that includes both cabinet and countertop pricing.
Service Areas Near San Francisco
We serve the full San Francisco service area, including the Sunset, Richmond, Noe Valley, and Cole Valley neighborhoods. We also take on CWS work in the broader Bay Area and Central Valley. If you’re outside the city, check our CWS service in Fresno or CWS service in Sacramento pages for coverage details.
Book Your CWS Service in San Francisco Today
We’ll send a background-checked, uniformed technician with a photo ID badge, and you’ll get that person’s name and photo before the visit. Your estimate is free, written, and covers the actual condition of your walls. Call (803) 680-2547 to schedule yours.
Written by Isaac Pruett, Owner at Mason Remodeling, serving San Francisco since 2004.
