Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Santa Rosa, CA | Mason Remodeling
We provide independent CGI cabinet installation, repair, refacing, and General Contractor in Santa Rosa services including full kitchen remodeling across Santa Rosa, CA. We are not an authorized CGI dealer. What that means for you is simpler pricing and one company accountable for the whole job, from scribing a crooked 1950s wall to setting the quartz. Call (803) 680-2547 for a written, line-item estimate before any work begins.
Why Santa Rosa Residents Choose Us for CGI Service
CGI cabinets show up in a lot of Santa Rosa kitchens. They are a solid mid-range line, and when they are installed square, level, and anchored to the actual wall behind them, they hold up well. The problem is that Santa Rosa’s housing stock rarely gives you a square, level wall to work with. We have installed and serviced CGI cabinetry across Sonoma County for years, so we know how this line is built, how it adjusts, and where it fails in real homes here, not in a showroom.
Isaac Pruett, our owner, grew up watching his dad, a finish carpenter, tear out work that looked fine from six feet away but fell apart up close. He still checks trim alignment on every job before he calls it done. That same standard applies to every CGI box we hang in Santa Rosa. We carry CGI-compatible OEM-spec hinges, glides, and touch-up materials in our local service van, and when a factory part is discontinued, we use quality aftermarket Blum-style hardware instead. You get a door that closes soft, a drawer that glides straight, and a cabinet run that does not rack out of square in the first Sonoma County summer. We quote, install, and warranty our own work under the 365-Day Done Right Promise.
Styles & brands we work with
Common CGI Construction Problems We Solve in Santa Rosa
Here are the five CGI cabinet issues we see most often in Santa Rosa homes, and what the local factor is behind each one:
- Swollen particleboard or MDF boxes at the toe kick and under-sink base. A slow p-trap leak or dishwasher drip plus Santa Rosa’s damp winter humidity means the kick plate wicks water for months before anyone notices. We replace the box rather than patch it; a swollen cabinet loses its structural grip on the hinge screws.
- Thermofoil and laminate door faces peeling or bubbling near ranges and dishwashers. The daily heat-and-steam cycle eventually separates the thermofoil from the MDF core. Once it starts at a corner, it travels. We can reface the doors and keep the original boxes if the boxes are still sound.
- Soft-close hinges and drawer glides drifting out of adjustment or snapping. Busy family kitchens in Santa Rosa put thousands of open-close cycles on that hardware every year. The soft-close piston wears, the clip loosens, and doors start slamming or hanging crooked. We reset or replace the hardware, and adjust the reveals so the door faces sit even.
- Cabinet boxes racking out of square. Sonoma County’s expansive clay soils move. A wall that was close to plumb in 1962 is not close now, and a cabinet run screwed tight to that wall will twist with it. We shim and scribe rather than force the box to a bad wall.
- Upper cabinet runs pulling away from the wall. Older Santa Rosa cottages have plaster over wood lath, and the original screws were often too short or missed the studs entirely. We locate the framing, use proper anchors, and re-hang the run secure.
CGI Service in Santa Rosa: What Local Conditions Mean for Your Equipment
Santa Rosa’s housing stock swings from pre-1950s cottages in the Bennet Valley and Junior College area to newer rebuilds in Fountaingrove and Coffey Park, and that one fact changes how we install the same CGI cabinet line from one side of town to the other. The older homes have walls that are nowhere near plumb, so a cabinet run needs scribing and shimming, not just screwing boxes to studs. The rebuild-era homes, by contrast, tend to sit on flat, level concrete slabs. That means we can anchor and level the base run faster and with less waste, but we still check the wall top to bottom before any box gets hung. A homeowner on Montgomery Drive is not getting the same install as a homeowner on Coffey Lane, even if they order the same CGI shaker door style. Here is a story that captures it. In a 1950s ranch house off Montgomery Drive, our crew pulled a water-swollen CGI base cabinet under the sink and found the toe kick had been wicking for years. We replaced the damaged box with a matching CGI cabinet, reset the drawer glides and soft-close hinges, and shimmed the run level against the out-of-square wall before setting a new quartz top. The homeowner kept the rest of the CGI doors after we cleaned and adjusted the hardware, which saved the cost of a full cabinet replacement. That is the Santa Rosa version of CGI service: repair what is sound, replace what is not, and build everything to the wall you actually have. Know who’s coming, know what it costs, know it’s backed up, everything else is just noise.
CGI Models & Products We Service in Santa Rosa
We work on the full CGI cabinet range homeowners in Santa Rosa actually have in their kitchens and baths. That covers the CGI Cabinets Ready-to-Assemble shaker-door kitchen lines, the semi-custom plywood-box cabinet series, CGI bath vanity and linen cabinet lines, and the CGI cabinet organizers, drawer boxes, and soft-close hinge and drawer hardware that ship with them. When parts are needed, we use CGI-compatible OEM-spec hinges, glides, and touch-up materials where they are still available, and quality aftermarket Blum-style hardware when they are not. No factory-order wait, no “we have to call the manufacturer.” Most common hardware lives on our van, so a Santa Rosa service call usually finishes in one visit. For broader CGI sales & service, our team handles everything from single-box swaps to full-kitchen tear-outs.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Santa Rosa
Here is the line-item pricing for the most common CGI-related jobs we quote in Santa Rosa. These are real ranges we have written into estimates across Sonoma County, and they are what you will see on your written quote before any work starts.
| Service | Typical Range in Santa Rosa |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost more than anything in Santa Rosa is the wall behind the cabinet. A plumb, level slab-built Fountaingrove home installs fast. A 1940s Bennet Valley cottage with a wandering wall eats hours in scribing and shimming. The material line stays the same; the labor is what moves the number. Your free estimate is a written, line-item price, no verbal range that grows later. Call (803) 680-2547 and we will measure the actual walls before we quote the actual number.
Serving Santa Rosa, CA - Our Local Coverage Area
We’re based in the Santa Rosa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Santa Rosa
Yes, in most cases. If the door style is still in production, we order the matching CGI door or drawer front and match the finish as closely as the factory allows. If the line has been discontinued, we work with a local Sonoma County refacing shop to match the profile and finish closely enough that the repair does not stand out in the run. Call (803) 680-2547 and we will tell you honestly whether a match is realistic before you spend anything.
No. Mason Remodeling is an independent remodeling company serving Santa Rosa and greater Sonoma County. We are not an authorized CGI dealer, and we do not represent ourselves as one. What we offer is installation, repair, and refacing of CGI cabinetry done to our own written workmanship standard, with our own warranty behind it. For the full picture of where we work, see our Santa Rosa service area page.
It depends on how far the damage goes. If the swelling is contained to the sink base and the rest of the run is square and dry, we replace that one box and rehang the existing doors, which is a repair, not a remodel. If the moisture has traveled through the shared side panels into the adjacent cabinets, or the run has racked out of square, you are looking at a partial or full cabinet replacement, which prices like a remodel. The honest answer comes from pulling the toe kick and looking, which we do during the free estimate. Call (803) 680-2547 to schedule that.
Older Santa Rosa homes, especially the pre-1950s cottages in the Junior College area and Bennet Valley, almost never have plumb walls. If we hang a CGI run tight to that wall, the cabinets twist, the doors bind, and the corner joints stress. We account for it by scribing filler strips, shimming behind the boxes at every stud, and setting the run level off the floor rather than the wall. That extra labor is why two identical kitchens in Santa Rosa can land at different price points.
We do both, and we recommend whichever makes sense for the cabinet’s condition. When the boxes are square, dry, and structurally sound, refacing the doors and drawer fronts is usually half the cost of new cabinets and keeps the kitchen intact. When the boxes are swollen, crumbling, or racked, we replace them, because new doors on a failing box is money spent twice. For specific pricing, call (803) 680-2547 and ask for a written reface-versus-replace comparison.
Service Areas Near Santa Rosa
Our crews run throughout Sonoma County and into the neighboring metros for larger projects. Common service areas beyond Santa Rosa include Rohnert Park, Petaluma, Windsor, Cotati, and Sebastopol. We also support homeowners relocating from farther out, including those searching for CGI service in Rancho Cucamonga or CGI service in Oceanside.
Book Your CGI Service in Santa Rosa Today
If your CGI cabinets are swelling, sagging, peeling, or just never sat right from the day they were installed, call us. We will put a name, photo, and badge on whoever comes to your door, and a written price in your hand before any tool comes out of the truck. Call (803) 680-2547 for a free estimate in Santa Rosa.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Santa Rosa since 2004.
