Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Los Angeles Owner’s Guide
Boral roof tile repair and replacement in Los Angeles typically runs $710 – $2,950 for a targeted fix, while a full Boral roof replacement on a standard LA home falls between $9,440 and $23,600. We stock Boral-compatible tiles, flashing, underlayment, and ridge caps in our local trucks, so most repairs go from diagnosis to done in a single visit. Most Los Angeles homeowners discover a Boral problem the same way: a tile slid out of place after a Santa Ana wind event, a small water stain shows up on the ceiling below a cracked tile, or granules start collecting in a gutter after heavy winter rain. The good news is Boral concrete and clay tile is among the most durable roofing material made; the bad news is when one piece fails, the failure rarely stays isolated for long.
Which Boral Models This Applies To
Mason Remodeling works on the full Boral product line across Los Angeles, from the classic Boral concrete flat tile in Mission and Spanish profiles to the Boral clay barrel tiles you see all over neighborhoods like Los Feliz, Hancock Park, and the older streets of Pasadena. The two most common Boral tile types we service are the Boral Eco-Logic concrete tiles (flat, low-profile, often found on mid-century and ranch homes) and the Boral clay two-piece cap-and-pan systems (the curved barrel look common on Spanish and Mediterranean homes built from the 1920s through today).
Here is the compatibility gotcha most Los Angeles homeowners never hear about: Boral has changed manufacturing specs more than once since the company expanded its concrete tile lines in the early 2000s. A tile that looks identical from the street may have a slightly different underside profile, a different interlocking rib, or a fractionally different thickness than the tile on your roof. If we install a near-match instead of the correct spec, water channels behind the lip and the tile looks wrong from day one. We identify the exact tile by checking the underside stamp, measuring the profile with a caliper, and matching the color batch where needed. For older discontinued Boral colors (the weathered terracotta tones especially), we work with local Los Angeles salvage yards and Boral distributors to source a match rather than slapping down a paint-match that chalk-fades in two summers.
OEM Boral tiles are the default choice when the roof is under active warranty or when the color match is critical. Quality aftermarket equivalents can work fine on out-of-warranty roofs, but only when the profile spec is exact. We stock common Boral profile tiles on the truck for same-day repairs; odd sizes or discontinued colors usually take two to five business days to source through our LA supply chain.
Mason Remodeling is an independent roofing and remodeling contractor. We install and repair Boral products, but we are not a Boral-owned or Boral-operated company.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
Boral tiles are engineered to last fifty years or longer, but the system around them (underlayment, flashing, fasteners, ridge mortar) usually fails first. Here is what we see most often on Los Angeles roofs, in order of frequency:
- Cracked or chipped tiles along the roof edge or valleys. This usually comes from foot traffic during gutter cleaning, satellite repair, or solar panel work. Tile that is cracked all the way through channels water into the underlayment. On many LA homes we inspect, three or four cracked tiles have been letting water through for years before the ceiling stain shows up.
- Slipped tiles after a wind event. Santa Ana winds regularly hit 40 – 60 mph in the foothills and passes of the San Fernando Valley. When a nail or lug from the original install was missed, the tile works loose and slides out of line. You can sometimes see the gap from the ground as a dark shadow in an otherwise uniform field.
- Granule loss in valleys and downspout drainage. Concrete tiles shed a fine sandy material as they age. A little granule washing in the first year is normal; continuous granule loss after a decade usually signals the tile body is degrading, often from the specific LA combination of UV exposure and overnight marine-layer moisture.
- Water stains on ceilings or exterior walls near the roofline. This is the late-stage warning. The stain means the tile and underlayment have already failed at that point. Waiting at the stain stage turns a $710 tile repair into a $2,500-plus underlayment and framing repair.
- Crumbling ridge mortar or exposed ridge caps. On Boral cap-and-pan systems, the ridge caps are set in mortar. Los Angeles sun bakes the mortar over 20 – 30 years until it cracks and falls away, leaving the caps loose. This is one of the most common Boral failures we repair in older San Fernando Valley neighborhoods.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Los Angeles, a focused Boral tile repair (replacing a handful of cracked or slipped tiles, resetting ridge caps, re-bedding minor flashing) runs $710 to $2,950 depending on tile type, color match difficulty, and roof access. A full Boral roof replacement on a standard single-story LA home runs $9,440 to $23,600; two-story and steep-pitch roofs in the hills push toward the higher end. The biggest cost drivers are the specific Boral tile (clay barrel costs more than concrete flat), the underlayment condition, whether we are doing a lift-and-reset on salvageable tile, and disposal of the old material in LA County.
Every repair quote from Mason Remodeling is a written line-item price delivered before work starts. That price includes all materials, labor, cleanup, and haul-away. There are no change orders unless we find something hidden behind the tile that genuinely changes the scope, and you approve it in writing before we touch it. Our workmanship warranty runs 365 days from the completion date. If a repair or installation fails within that year, we return free of charge and make it right. That is our Done Right Promise in plain terms.
DIY or Call Us?
You can safely do the legwork from the ground or a ladder that does not touch the roof: take photos from multiple angles, note where the visible damage sits in relation to valleys and ridge lines, and check the gutters for granule buildup. What we do not recommend is walking a Boral roof yourself, especially on a two-story Los Angeles home or any roof with pitch steeper than 4:12. Concrete and clay tile is brittle, it becomes slick with morning dew or dust, and one misstep cracks three tiles you now have to buy. The safety issue is real: we use roof brackets, fall protection, and tile-safe walk pads on every repair. The honest version is that a homeowner who walks the roof to save the $200 service call usually costs themselves $800 in cracked tiles. Call (803) 680-2547 and send us photos first; we will tell you if the problem is urgent or if it can wait until our next round in your part of Los Angeles.
FAQs
Boral concrete tiles are engineered to last 50 years on a proper install, and clay tiles routinely exceed 75 years in the Los Angeles climate. The underlayment underneath, however, usually needs replacement at the 25 to 35 year mark, which is why a full replacement of a 40-year-old Boral roof is as much an underlayment job as it is a tile job. Call (803) 680-2547 if you want us to assess whether your underlayment still has life left.
A cracked tile cannot be safely patched or sealed; the correct fix is removing the damaged tile and installing a matched replacement. The good news is a tile swap is a small, controlled job, usually completed as part of a sheet repair visit rather than a full roof job. We will give you the per-tile and per-visit price in writing before we begin.
A typical single-tile or flashing repair takes two to four hours on site. A full Boral roof replacement on a standard Los Angeles home typically runs five to ten working days, depending on roof size, pitch, and whether we are reusing any tile. We set the schedule with you in writing before we start, and it does not change unless weather forces a delay.
We keep common Boral Eco-Logic concrete flat tiles and the most-used clay cap-and-pan components on our trucks for same-day repair work across Los Angeles. Discontinued colors, rare profiles, and large-replacement quantities generally have a two to five business day lead time through our LA distributors and salvage partners. We will tell you on the estimate exactly where the tile is coming from and when it lands.
Written by Isaac Pruett, Owner, Mason Remodeling at Mason Remodeling, serving Los Angeles and nearby areas.
