Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Los Angeles, CA | Mason Remodeling
If you’re searching for Ameristar construction service in Los Angeles, you’re likely dealing with cabinets that are peeling, boxes that have swollen, or a kitchen that needs a full rework. We’re Mason Remodeling, led by Isaac Pruett, and we install, reface, and service Ameristar cabinetry across Los Angeles every week. The thing that sets our Ameristar work apart here: we know these cabinets fail in specific ways in this city’s climate and housing stock, and we price for the real conditions, not a square-room fantasy. Call (803) 680-2547 for a free estimate.
Why Los Angeles Residents Choose Us for Ameristar Service
We’ve been inside enough Los Angeles kitchens to recognize an Ameristar cabinet line from across the room. That matters because Ameristar products live in a particular corner of the market: solid value, but with a handful of failure points that show up reliably in local conditions. Our team has installed the Burlington and Bristol raised-panel oak and maple lines, the Hartford and Stonegate thermofoil series, and the Shaker-style painted MDF program sold through major home centers. We read the spec sheets before pricing anything, so the quote you get matches what the product can actually do.
Isaac Pruett grew up in Sylmar, where he learned early that the last guy’s short cuts are tomorrow’s project. He trained in construction technology at Los Angeles Trade-Technical College and has spent nearly two decades remodeling homes across this city. He checks trim work on every job before it’s done, because his dad was a finish carpenter and sloppy work still bothers him. For homeowners who want Ameristar sales & service handled by people who know the product’s real weaknesses, that’s the difference.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Los Angeles
- Thermofoil delamination above gas ranges. Ameristar’s Hartford and Stonegate thermofoil doors peel at the edges when they sit above a gas range or near a dishwasher vent. The heat-and-moisture cycling breaks the film bond. We see this constantly in older LA kitchens where cabinet layout puts uppers directly over the cooktop.
- Swollen particleboard boxes from hidden leaks. Standard Ameristar boxes use stapled-and-glued particleboard joinery. In slab-on-grade Los Angeles houses, a pinhole supply-line leak behind the fridge goes unnoticed for months, and the box swells and racks. By the time you see it, the cabinet is usually done.
- Painted MDF Shaker doors cracking in Santa Ana season. Los Angeles’s low-humidity wind season pulls moisture out of painted MDF doors, and the center panel joint cracks. Then interior humidity swings back up and the paint blisters. It’s a predictable cycle here.
- Worn nylon glides and stamped hinges. The value-tier Ameristar hardware lasts three to five years of daily use. In Los Angeles rental kitchens that turn over between tenants, that lifespan shrinks further because nobody treats the drawers gently.
- Cabinet boxes racked on out-of-square walls. Los Angeles homes built before 1960 rarely have a square, plumb wall. Ameristar boxes ship with fixed factory dimensions, so installers who don’t shim and scribe end up with crooked faces and doors that won’t close.
Ameristar Service in Los Angeles: What Local Conditions Mean for Your Equipment
The single biggest factor in Ameristar cabinet performance in Los Angeles isn’t the product. It’s the framing behind it. A lot of kitchens in this city sit against original 1920s-to-1950s walls that are out of plumb by half an inch or more over a run. Ameristar cabinets ship with fixed, factory-cut box dimensions, so any LA bid that assumes a square room is going to change-order you later. We regularly work in neighborhoods like Echo Park, Silver Lake, and West Adams where the plaster walls bow and the floor slopes. In those kitchens, we use scribe fillers and custom shimming on the wall side so the cabinet faces sit flush and the doors align. It’s the difference between a clean install and a visible gap at the crown.
Ameristar Models & Products We Service in Los Angeles
We service the full Ameristar range homeowners encounter in Los Angeles. That includes the Burlington and Bristol raised-panel oak and maple lines, the Hartford and Stonegate white and grey thermofoil series, the Shaker-style painted MDF program, and the value-tier slab and full-overlay collections. When a box is sound, we use Ameristar OEM hinges, glides, and replacement doors. When a customer wants an upgrade, we spec quality aftermarket Blum-style soft-close hardware at a lower cost than factory parts. If a box is water-swollen or the glue joints have failed, we tell you straight that refacing is a waste of money and only full replacement makes sense. For Los Angeles homeowners, that means parts are available quickly and we’re not guessing at compatibility.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Los Angeles
Here’s what Ameristar-related work typically costs in Los Angeles. These ranges reflect what we see across the city, from small bungalow kitchens to larger renovated spaces. The final number depends on wall condition, cabinet run length, and whether we’re refacing or replacing boxes.
| Service | Los Angeles Price Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
Our written estimate comes before any work starts, and it’s detailed by line item. No verbal number that grows later. Los Angeles homeowners should expect a free estimate that accounts for the wall conditions we measure on site. Call (803) 680-2547 to schedule yours.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Los Angeles
It depends on the boxes. If the particleboard is sound and the glue joints are holding, refacing with new Ameristar doors and veneers is a practical option. If the boxes have swelled from moisture or the joinery has racked, refacing won’t fix the structure and we’ll recommend replacement. We’ll show you what we’re seeing before you spend anything. Call (803) 680-2547 to have us look.
Thermofoil peels when heat and moisture cycling breaks the film’s bond at the door edge. In Los Angeles, that typically means the door sits above a gas range or next to a dishwasher vent. Once the edge lifts, steam penetrates and the delamination spreads. Replacement doors with better edge sealing or a painted MDF alternative usually solves it. We can match the style and get you a firm number.
Cabinet installation alone generally doesn’t require a building permit when you hire our General Contractor in Los Angeles. If the work includes moving plumbing, altering electrical, or structural changes, a permit is likely required and we handle that as part of the job. We pull permits when the scope calls for it, and the inspections get passed.
A straightforward cabinet-only installation in Los Angeles typically runs three to five working days. If the walls need significant shimming or we’re doing custom scribe work, add a day or two. A full kitchen remodel with countertops and backsplash, like our Bathroom Remodeling in Los Angeles, is usually two to four weeks. We’ll give you a written schedule with the estimate.
They can be, with one caveat. The value-tier Ameristar lines hold up fine under normal use, but the stock nylon glides and stamped hinges wear out in a few years, especially with tenant turnover. If you’re outfitting a rental, we recommend upgrading to soft-close hardware at installation and choosing painted MDF over thermofoil for units near heat sources. It costs a little more up front and saves a callback later. Call (803) 680-2547 for a rental-specific quote.
Service Areas Near Los Angeles
We serve the greater Los Angeles area, including Los Angeles service area neighborhoods from the Valley to the coast. For homeowners outside our core Los Angeles coverage, we also offer Ameristar service in San Diego and Ameristar service in San Jose. If you’re near any of these cities, call and we’ll confirm coverage.
Book Your Ameristar Service in Los Angeles Today
Know who’s coming, know what it costs, know it’s backed up – everything else is just noise. Every crew member arrives in a marked uniform with a photo ID badge, and their name and photo come to you before the visit. Call (803) 680-2547 to schedule your free estimate for Ameristar work in Los Angeles.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Los Angeles since 2004.
