Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Los Angeles Owner’s Guide
If you own a Wellborn kitchen and a part has failed or is wearing out, we stock and install Wellborn-compatible hinges, drawer slides, cabinet doors, roll-out trays, and hardware across Los Angeles. A typical Wellborn kitchen remodeling job in Los Angeles runs $16,520 to $53,100, though a single replacement part like a hinge or slide assembly is often far less. Most owners discover the problem the same way: a drawer that suddenly sticks, a door that won’t close square, or a soft-close mechanism that stopped catching.
Wellborn cabinets are well-built, but they’re not immune to daily use, dry California air, or hardware that simply wears past its service life. The good news is that most failures are isolated. You don’t need a full remodel to fix what’s broken. We help Los Angeles homeowners match the exact Wellborn part, install it properly, and avoid the rabbit hole of guessing wrong on a $40 hinge that then ruins the alignment of a $400 door.
Which Wellborn Models This Applies To
Wellborn runs several cabinet lines, and parts aren’t always interchangeable between them. The main series you’ll find in Los Angeles homes are Wellborn Estate, Wellborn Premier, Wellborn Select, and the semi-custom Wellborn Cabinet line. Each series uses slightly different hinge plates, mounting screw patterns, and drawer slide configurations. A hinge from a Premier door won’t necessarily align on an Estate frame, even if it looks identical at a glance.
The fastest way to identify your Wellborn part is to open the cabinet door and look on the inner hinge cup or drawer slide rail. Wellborn stamps a small part number or date code on most hardware manufactured after 2010. If the stamp is worn off, measure the hinge cup diameter: Wellborn doors typically use a 35mm cup bore, but some older Estate models used a 26mm cup. That single measurement saves more mis-orders than any other check we do. For aftermarket replacements, Blum and Grass both make slide and hinge hardware that matches Wellborn specs, and we carry both on our trucks. OEM Wellborn parts cost 20-40% more and can take two to three weeks to order in Los Angeles. We’ll tell you honestly which path makes sense for your cabinet.
Styles & brands we work with
Signs Your Wellborn Kitchen Remodeling Is Failing
- A drawer slides out, then drops or catches halfway. This almost always means the ball-bearing slide has lost its nylon cage or the rail has bent from years of pulling a fully loaded drawer at an angle. The slide needs replacement, not lubrication.
- The soft-close mechanism stopped engaging. On Wellborn doors, the hydraulic damper inside the hinge cup wears out. You’ll hear the door click shut instead of that silent, cushioned close. It’s a $15 to $25 part with a 15-minute install.
- A cabinet door hangs lower on one side, or rubs the frame. The hinge plate screws have stripped or the hinge arm itself has crept out of adjustment. If the screw holes are wallowed out, we drill, fill, and re-drill for a permanent fix.
- The corner of a door or drawer front is delaminating. In Los Angeles, dry air and sun exposure through unshaded kitchen windows cause the laminate edge to lift. A door that’s delaminated can sometimes be re-glued and clamped; a swollen particleboard core usually means the door gets replaced to match the Wellborn stain or paint code.
- You smell a musty note when you open a cabinet under the sink. That’s often the cabinet floor flexing from moisture exposure, and it means the box itself, not the hardware, has failed. We can rebuild the base cabinet to match surrounding Wellborn boxes without tearing out the whole run.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Wellborn kitchen remodeling work costs in Los Angeles, installed:
| Scope of Work | Typical Installed Range |
|---|---|
| Full kitchen remodel (Wellborn cabinet replacement, new hardware, labor) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation (new Wellborn or aftermarket boxes) | $4,720 – $15,340 |
| Single hinge or drawer slide replacement | $75 – $250 |
| Cabinet door replacement (matched to existing Wellborn finish) | $300 – $900 per door |
The range for a full remodel reflects cabinet count, whether you’re keeping existing boxes or replacing everything, countertop integration, and how much of the surrounding work (backsplash, electrical, plumbing) moves with it. We give you a written price before any work starts on every Wellborn job in Los Angeles. That price includes parts, labor, cleanup, and our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we fix it at no cost to you.
DIY or Call Us?
Replacing a soft-close hinge on a Wellborn cabinet is a reasonable DIY job for a homeowner with a Phillips screwdriver and patience. The hinge unclips from the plate, the new one snaps in, and you’re done in 20 minutes. Drawer slides are trickier: the slide has to sit perfectly parallel to the cabinet floor or the drawer will bind no matter how carefully you level it. We’ve fixed more than a few slide installations that a homeowner spent a Saturday on, only to have the drawer rock.
The one job we tell Los Angeles homeowners not to attempt is removing a Wellborn door with delaminated laminate. What looks like a simple glue-and-clamp can turn into a cracked door face, and matching a Wellborn paint code or stain after the fact is a process, not a guess. If you’re not sure what you’re looking at, call us at (803) 680-2547. We’ll tell you over the phone what we think it is, what it should cost, and whether it’s worth a service call. No pressure either way.
FAQs
Wellborn hinges and slides typically last 10 to 15 years in normal use. In Los Angeles, where dry air accelerates plastic damper wear, we often see soft-close hinges start failing around year 8 or 9. Doors and drawer fronts can last 20 or more years if the finish line wasn’t factory-defective and the cabinet doesn’t sit near a heat source. Call (803) 680-2547 for an evaluation of your specific Wellborn setup.
Some can. Hinge plates with stripped screw holes can be re-drilled and filled with a hardwood dowel. Adjustable hinge arms can be re-aligned. But a ball-bearing slide with a broken cage or a soft-close damper that’s lost its fluid can’t be repaired, only replaced. We’ll tell you honestly which case you’re in. Call (803) 680-2547 and describe what you’re seeing.
A single hinge or slide replacement takes under an hour from arrival to cleanup. A full Wellborn cabinet replacement across a standard Los Angeles kitchen runs one to three weeks depending on cabinet count, countertop templating, and whether plumbing or electrical moves. We give you a written timeline with your written price before any work starts.
We stock common Wellborn-compatible soft-close hinges, drawer slides, shelf pins, and door bumpers on our trucks, along with matching adjustment clips. If your part is series-specific or the finish has to be ordered from Wellborn, we’ll quote you lead time in the estimate and handle the ordering ourselves. Call (803) 680-2547 with your cabinet door open and the part in your hand if you can; it speeds things up considerably.
If you have a Wellborn kitchen in Los Angeles and something’s failing, you don’t need to live with it or guess at a fix. Call Mason Remodeling at (803) 680-2547 and we’ll walk you through what you’re likely dealing with, what it should cost, and who exactly will arrive at your door: a background-checked, uniformed technician whose name and photo you’ll have before we ever ring the bell. Know who’s coming, know what it costs, know it’s backed up – everything else is just noise.
Written by Isaac Pruett, Owner, Mason Remodeling at Mason Remodeling, serving Los Angeles and nearby areas.
