Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fontana, CA | Mason Remodeling
We provide independent Ameristar cabinet, door, and trim service across Fontana, and the work here leans heavily toward full kitchen swaps rather than small repairs. That’s because Fontana’s housing stock is mostly 1980s to 2000s production homes, and a huge share of those kitchens still have the original builder-grade Ameristar thermofoil cabinets behind them. If you’re seeing peeling door skins, swollen toe kicks, or drawer boxes that sag under normal use, call us at (803) 680-2547. We’ll give you a written price before any work starts, and a straight answer on whether repair or replacement is the smarter move.
Why Fontana Residents Choose Us for Ameristar Service
Our crew has torn out and rebuilt enough Ameristar framing and cabinetry to know exactly where this line cuts corners in Inland Empire heat, and where it doesn’t. That matters in Fontana, because the summer temperatures here push thermofoil and laminate past what it was designed to handle. Isaac Pruett, our owner, grew up watching his dad finish trim work in the San Fernando Valley, and he still checks every cabinet door edge and drawer glide himself before a job is done. When we say we know Ameristar, we mean we’ve pulled enough of it apart to know which runs were built well and which ones were spec’d to a price point. We’re not a manufacturer-authorized service provider. We’re an independent Ameristar sales & service contractor, which means we tell you the truth about what’s worth fixing and what’s worth replacing. We also answer our own phones, every day, all day. No call trees.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Fontana
- Thermofoil and laminate skins lifting and peeling off cabinet doors. Fontana summers routinely push past 100°F, and kitchens attached to attic space or garages bake those door skins until the adhesive gives. Once peeling starts, it spreads fast, and door-by-door re-skinning rarely holds up. We usually recommend refacing or replacing the full run.
- Particleboard cabinet boxes swelling and crumbling at toe kicks. This one shows up after slab leaks or roof leaks, and it’s common in Fontana when an aging roof finally gives. Once water wicks into particleboard, the box loses its structural integrity. You can’t glue that back together.
- Drawer boxes sagging and blowing out stapled joints. The original Ameristar drawer boxes in production homes were particleboard with staple-and-glue corners. Under normal kitchen loads, those joints fail within a few years. We replace them with plywood or dovetail construction and upgrade to soft-close Blum slides.
- Steel entry-door frames and hinges rusting at the threshold. Santa Ana wind-driven rain and irrigation overspray both hit Fontana entry doors hard. The factory prehung Ameristar steel frames start rusting at the bottom corners, and the hinges seize up. We replace with corrosion-resistant hardware and proper weatherstripping.
- Builder-grade cabinet hardware wearing out. The hinges and slides on original Ameristar cabinetry were built to a production budget. They loosen, sag, and squeak. We carry OEM-spec replacements when Ameristar still stocks the line, and pivot to high-quality aftermarket Blum or equivalent hardware when it doesn’t.
Ameristar Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana’s housing stock is heavily 1980s to 2000s production-home construction, so a huge share of the kitchens we open up still have the original builder-grade Ameristar cabinet boxes and thin thermofoil doors behind them. That’s why our Ameristar work here skews toward full cabinet and countertop swaps rather than trim repairs. A homeowner in, say, Rancho Cucamonga Ameristar service or Rialto might call us about one warped door. In Fontana, by the time someone calls, it’s usually a whole run of peeling doors, a sagging drawer stack, and a toe kick that’s been absorbing water for years. On a job off Sierra Avenue in the Southridge area, we pulled a full run of Ameristar thermofoil cabinets where the door skins had peeled and curled from years of inland-heat cycling, and the particleboard boxes were swelling at the toe kick from an old roof leak. We replaced the boxes with plywood construction, installed new quartz tops and a tile backsplash, and tied it into a standing-seam metal roof repair so the leak source was gone before the new cabinets went in. That sequence, finding the leak first and rebuilding second, is the difference between a job that lasts and one that fails the same way in five years.
Ameristar Models & Products We Service in Fontana
We service the Ameristar by Builder’s Choice shaker-style base and wall cabinet sets, the thermofoil and laminate cabinetry used in production homes, and Ameristar steel and fiberglass entry doors with factory prehung jambs. When Ameristar still stocks the matching line, we use OEM-spec hinges, slides, and cabinet doors. When it doesn’t, and with 1980s and 1990s runs it often doesn’t, we move to aftermarket Blum or equivalent hardware that outperforms the original. Our local supplier network keeps common replacement doors, slides, and hinges within reach for fast turnaround in Fontana, so you’re not waiting weeks on a backordered OEM part that no longer exists.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fontana
Here’s what Ameristar-related work in Fontana typically runs. These are real ranges based on what we’ve quoted across Fontana service area jobs over the last few years.
| Project | Typical Fontana Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Roof Replacement & Installation | $8,000 – $20,000 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
The biggest cost driver is whether the cabinet boxes are salvageable. If the particleboard is swollen, that’s a full replacement, and the price reflects it. A written estimate from us includes a line-by-line breakdown, and we deliver that price before any work starts. No verbal estimates that grow on the final bill. Call (803) 680-2547 for your free estimate.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well, and we also provide San Bernardino Ameristar service. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fontana
If the peeling is limited to one or two doors and the boxes are still solid, we can replace the doors and match the hardware. If the peeling runs across most of the run or the boxes have absorbed moisture, refacing or full replacement is the honest answer. We’ll tell you which applies when we see the kitchen. For an exact quote on your cabinets, call (803) 680-2547 – estimates are free.
We use OEM-spec hinges, slides, and matching doors whenever Ameristar still stocks the line. When it doesn’t, which is common with older production-home cabinets, we install aftermarket Blum or equivalent hardware that outlasts the original. We’ll show you exactly what we’re installing and why.
Yes, and in Fontana it often should be. Roof leaks are the most common cause of the swollen toe kicks and cabinet box damage we see in production homes here. Fixing the roof first and the cabinets second means the new work isn’t ruined by the same leak in two years. We schedule both scopes on one written estimate.
A full kitchen remodel in Fontana typically runs $14,000 to $45,000 depending on cabinet count, countertop material, and whether the boxes need full replacement or just new doors. Quartz counters alone usually add $2,000 to $6,500. Call (803) 680-2547 for a written, line-by-line quote – free.
We do. Fontana’s production homes have the same builder-grade vanities and thermofoil doors in the bathrooms, and the same heat and moisture cycles make those fail too. We also cover Ameristar service in Ontario for similar bathroom projects. Full bathroom remodeling in Fontana typically runs $9,000 to $28,000. We’ll give you a fixed written price before any work starts.
Service Areas Near Fontana
While most of our Ameristar work is in Fontana proper, we also serve nearby communities. We run Ameristar service in Moreno Valley for homeowners dealing with the same production-home cabinet issues, and Ameristar service in Oxnard where coastal moisture creates its own set of problems. Each job gets the same written-price guarantee and the same crew verification.
Book Your Ameristar Service in Fontana Today
Know who’s coming, know what it costs, know it’s backed up – everything else is just noise. We send a background-checked technician by name and photo before the visit, and the price is in writing before any work starts. Call (803) 680-2547 to schedule your free estimate.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Fontana since 2004.
