Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Irvine, CA | Mason Remodeling
We provide independent CGI service across Irvine as a General Contractor in Irvine, from cabinet and countertop installation to refacing and full kitchen remodels. What makes our CGI work different here is simple: we know Irvine’s HOA architectural review process well enough to pre-check your CGI door styles and slab colors against community rules before you order a single thing. That one step has saved Irvine homeowners thousands in re-orders and rejected designs. Call (803) 680-2547 to talk through your project.
Why Irvine Residents Choose Us for CGI Service
Mason Remodeling has installed and repaired CGI cabinetry and surfaces in Irvine kitchens for years, and we’ve learned the product line deeply: CGI sales & service is a niche we take seriously. We’re an independent remodeling contractor, not a manufacturer-authorized dealer, which means we tell you the truth about what CGI products do well and where they struggle in Irvine specifically. Isaac Pruett, our owner, grew up watching his finish-carpenter dad check trim work twice, and he still checks every cabinet run the same way before calling a job done. Our crews understand OEM CGI parts, but we also stock high-quality aftermarket hinges and glides that often outlast the originals. If you’re in Irvine service area, you get a crew that knows the product and the town.
Styles & brands we work with
Common CGI Construction Problems We Solve in Irvine
- Swollen cabinet doors and drawer fronts. Irvine’s coastal humidity and morning marine layer push moisture into lower cabinets near sinks and dishwashers, and CGI cabinet edges swell when that moisture finds bare composite. We replace damaged boxes and reseal edges so the new run holds up better than the original.
- Peeling thermofoil and laminate finishes. Open-plan Irvine kitchens put upper CGI cabinets directly above ranges and ovens, where sustained heat breaks down the adhesive bond and the finish starts lifting. We remove the damaged doors, match the profile, and rebuild with a finish rated for that heat exposure.
- Hairline cracks in CGI quartz at sink cutouts. When the base cabinet is even slightly out of level, the slab flexes at the weakest point, which is almost always the undermount sink opening. We re-level the cabinet run, add proper support rails, then repair or replace the slab so the crack doesn’t return.
- Worn soft-close hinges and drawer glides. A family kitchen in Irvine opens and closes cabinet doors dozens of times a day. CGI soft-close hardware wears out within a few years under that load, so we swap in higher-cycle aftermarket hinges that stay quiet longer.
- CGI cabinet boxes with water damage. Once the composite core of a CGI box swells from a slow sink leak or dishwasher drip, patching doesn’t work. We give you a straight repair-vs-replace comparison based on the condition of the whole run, and we only recommend replacing what needs replacing.
CGI Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine is not like most Southern California cities when it comes to remodeling. The city’s HOA architectural review process and permit requirements often dictate specific finish colors and exterior-visible materials before a kitchen or bathroom remodeling project is approved. That means a CGI door style or countertop slab that looks great in a showroom can get rejected by your community’s design committee if it doesn’t match the approved palette. We pre-check every CGI selection against those rules before ordering, because catching a mismatch after the slab is cut means a re-order that costs weeks and hundreds of dollars. In Woodbridge, we remodeled a kitchen where the original CGI thermofoil cabinets had peeling finish on the upper doors above the range, and the quartz countertop had a hairline crack near the sink cutout. We replaced the damaged upper boxes with CGI shaker-style doors, re-leveled the base cabinets, installed a new CGI quartz slab with proper support, and added soft-close hinges throughout. The homeowner passed HOA review without a hitch because we matched the approved exterior-visible color palette. That kind of local knowledge is the difference between a smooth Irvine remodel and one that stalls at the review desk.
CGI Models & Products We Service in Irvine
We work on the main CGI product lines: Ready-to-Assemble (RTA) Kitchen Cabinets, the Shaker-Style Cabinet Series, CGI Quartz Countertops, and the Bath Vanity Collection. For repairs, we use OEM CGI replacement parts when they’re available and priced reasonably. When they aren’t, we source aftermarket hinges, soft-close mechanisms, and touch-up materials that often outperform the originals under Irvine’s coastal moisture and heat. We keep the most common hardware stocked locally so turnaround on a cabinet or countertop fix doesn’t drag on. If a CGI box is structurally compromised, we’ll tell you plainly and give you repair and replacement numbers side by side.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Irvine
Here’s what CGI kitchen work typically runs in Irvine, based on the project scope:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number is the size of the run, whether we’re doing full replacement or refacing, the slab material, and whether any base cabinets need re-leveling. Every estimate is written line by line before work begins, so you know exactly what you’re paying. Call (803) 680-2547 to schedule your free estimate and we’ll walk the space with you.
Serving Irvine, CA - Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Irvine
Kitchen heat and coastal humidity are the two main culprits. Upper cabinets above ranges and ovens take sustained heat that breaks down the thermofoil or laminate adhesive, while Irvine’s morning marine layer adds moisture along lower cabinet edges near sinks and dishwashers. The fix is usually replacing the affected doors with a finish better rated for that exposure, plus resealing lower edges. Call (803) 680-2547 for an exact diagnosis and quote.
Rarely perfectly. Quartz colors shift between production batches, so a small section replacement usually shows a visible seam. If you have a crack or chip near a sink cutout or seam, we’ll look at whether a structural repair fixes it, and if not, we’ll price a full replacement with proper leveling and support so the problem doesn’t return. Estimates are free at (803) 680-2547.
Refacing usually doesn’t trigger a permit in Irvine, but full cabinet replacement with plumbing or electrical changes often does, and your HOA may have its own review rules on finish colors and materials. We check both before we order anything, so you don’t get a design rejected or a stop-work order mid-project.
A standard cabinet reface or replacement in an average Irvine kitchen takes three to five working days from tear-out through final hardware adjustment. Countertop templating and slab fabrication add another week or so, depending on the stone yard. We give you a written timeline with the estimate so you can plan around it.
They perform fine when installed with proper ventilation and sealed edges, but Irvine’s coastal humidity will find any unfinished composite edge and swell it. We seal lower cabinet edges near sinks and dishwashers on every CGI install, and we recommend heat-rated finishes on uppers above ranges. That combination makes a measurable difference in how long the run lasts. Call (803) 680-2547 to talk through the details for your kitchen.
Service Areas Near Irvine
We serve Irvine and the surrounding communities. If you’re in CGI service in Santa Ana or CGI service in Chula Vista, give us a call to see if we can get a crew to you. We also field calls from Los Angeles, San Diego, San Jose, San Francisco, Fresno, and Sacramento for larger CGI kitchen and bath projects.
Book Your CGI Service in Irvine Today
Know who’s coming, know what it costs, know it’s backed up – everything else is just noise. Call (803) 680-2547 for a free estimate on your Irvine CGI cabinets or countertops. A live person answers, day or night.
Written by Isaac Pruett, Owner at Mason Remodeling, serving Irvine since 2004.
